{"title":"Built for Dash-board PWS","description":"\u003cp\u003eBuilt specifically for the Dashboard PWS ecosystem. BenchGrip pods for vacuum workholding directly on the PWS surface. SMR, TRK, and SAR racks for tool and accessory storage along the extrusion rails. Products designed for this surface.\u003c\/p\u003e","products":[{"product_id":"sys-fit-track-saw-guide-rail-trk-rack","title":"SYS-FIT - Track Saw Guide Rail (TRK) Rack","description":"\u003cp\u003eTrack saws are amazing and a quality guide rail makes precision cuts effortless... That is until you are done with the large unwieldy piece of aluminum and you don't have a place to safely stow it.  Stop trying to find a place to put down that rail, simply use our SYS-FIT TRK Rack to quickly store and redeploy your guide rail whenever and wherever you are working.\u003c\/p\u003e\n\u003cp\u003eDesigned to work with our SYS-PLT mounting system, the SYS-FIT TRK Rack can attach to the front of your Systainer stack, to the side of an MFT or other workbench utilizing one of our supported profiles, along with many more mounting options simply by using the available fastener locations.  When used with one of our many workbench options, the guide rail nestles below the surface of the bench-top to allow quick removal and placement of new materials without worrying about your guide rail getting in the way.\u003c\/p\u003e\n\u003cp\u003eThe SYS-FIT TRK Rack has been tested and works with the following guide rails, with most other guide rails also being supported but are untested.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFestool\u003c\/li\u003e\n\u003cli\u003eBosch\u003c\/li\u003e\n\u003cli\u003eDewalt\u003c\/li\u003e\n\u003cli\u003eKreg ACS\u003c\/li\u003e\n\u003cli\u003eMafell\u003c\/li\u003e\n\u003cli\u003eMakita\u003c\/li\u003e\n\u003cli\u003eMilwaukee\u003c\/li\u003e\n\u003cli\u003eTriton\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe TRK Rack badge allows you to customize your color to match your track saw system, while at the same time hiding an additional mounting point if you need more support or are mounting the TRK Rack to an angled or vertical surface.  Once you've mounted your TRK Rack simply snap the badge into place for that extra pop of color!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSYS-FIT TRK Rack Includes:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) TRK Racks\u003c\/li\u003e\n\u003cli\u003e(2) TRK Rack badges\u003c\/li\u003e\n\u003cli\u003e(8) M4 fasteners for use with SYS-PLT Mounting Option (sold separately)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe available SYS-PLT Mounting Options must be purchased separately and are listed below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSYS-PLT - Systainer3 Mount\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - MFT Minimus Mount *\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - MFT Maximus Mount\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - Dash-Board PWS Minimus Mount*\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - Dash-Board PWS Maximus Mount\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - 15-Series Minimus Mount *\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - 15-Series Maximus Mount\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - French Cleat Mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eAre you wandering the wilderness without a Systainer, an MFT, a workbench constructed out of 15-series aluminum extrusion or haven't gone down the french cleat rabbit hole???  Well then no SYS-PLT purchase is necessary, simply take our SYS-FIT products and screw them to whatever surface you fancy.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have questions about our colors, please visit our \u003ca title=\"SYS-FIT \u0026amp; SYS-ORG Color Palette Information\" href=\"https:\/\/forg3d.store\/pages\/sys-fit-sys-org-color-palette-information\" target=\"_blank\"\u003eSYS-FIT \u0026amp; SYS-ORG Color Palette Information\u003c\/a\u003e page.\u003c\/p\u003e\n\u003cp\u003e* While the TRK Rack fits all of our SYS-PLT mounts, the TRK Rack does experience quite a bit of torque under load.  We would recommend using one of our Maximus mounts or use with caution when using the TRK Rack with any of our Minimus Mounts.  Using the bottom attachment points can reduce the applied moment or placing the TRK rack in a position where the lower back of the mount is supported \u003c\/p\u003e\n\u003cp\u003eTrack saw guide rail, track saw and systainer pictured are not included in purchase.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"FORG3D","offers":[{"title":"Festool Green","offer_id":48076105646394,"sku":"FIT.TRK.GDRAIL.Q01.A.6018","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Bosch Blue","offer_id":48076105711930,"sku":"FIT.TRK.GDRAIL.Q01.A.5001","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Makita Teal","offer_id":48076150243642,"sku":"FIT.TRK.GDRAIL.Q01.A.5021","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Carmine Red (RAL3002)","offer_id":48076150276410,"sku":"FIT.TRK.GDRAIL.Q01.A.3002","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Daffodil Yellow (RAL1007)","offer_id":48076150309178,"sku":"FIT.TRK.GDRAIL.Q01.A.1007","price":42.0,"currency_code":"USD","in_stock":true},{"title":"Deep Orange (RAL2011)","offer_id":48076150341946,"sku":"FIT.TRK.GDRAIL.Q01.A.2011","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/DSC00464.jpg?v=1741914012"},{"product_id":"sys-grp-bench-grip-vacuum-pods","title":"SYS-GRP BenchGrip Minimus Vacuum Pods","description":"\u003cp\u003eWhen the workpiece is small, clamps get big — and the process starts fighting you. Sometimes the setup takes longer than the operation.\u003c\/p\u003e\n\u003cp\u003eSYS-GRP BenchGrip Minimus Pods keep workholding compact and modular: a 90mm vacuum pod designed for single dog hole mounting, standard extrusion profiles, custom brackets, or direct bench fastening. Start with a Single Port Minimus, then chain Dual Port units to build a stable hold-down layout that scales with the job.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMinimus Single Port\u003c\/strong\u003e\u003cbr\u003eBenchtop work or vertical mounting on standard extrusion profiles using optional hardware — the foundational Minimus configuration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Minimus Single Port Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(1) M6 × 20mm Flanged Button Head Fastener\u003c\/li\u003e\n\u003cli\u003e(1) SYS-GRP Rail Insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimus Dual Port\u003c\/strong\u003e\u003cbr\u003eSame 90mm footprint as Single Port. Chain pods together for greater stability and cumulative hold-down force across wider workpieces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Minimus Dual Port Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(1) M6 × 20mm Flanged Button Head Fastener\u003c\/li\u003e\n\u003cli\u003e(1) SYS-GRP Rail Insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMinimus Offset Mount\u003c\/strong\u003e\u003cbr\u003eRelocated mounting hole for Dash-Board PWS and vertical extrusion profiles where clearance below the surface matters. Retains full Single Port holding power.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Minimus Offset Mount Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(1) M6 × 20mm Flanged Button Head Fastener\u003c\/li\u003e\n\u003cli\u003e(1) SYS-GRP Rail Insert\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with budget vacuum pumps, VacuPress Compact 150 and larger, and Grabo Pro-Lifter \/ DeWalt Grabo (with SYS-GRP Grabo Pro Adapter Kit)\u003c\/li\u003e\n\u003cli\u003eMFT-style benches with standard 96mm dog hole pattern\u003c\/li\u003e\n\u003cli\u003ePairs with SYS-GRP Nexus Baseplate for portable vacuum workholding\u003c\/li\u003e\n\u003cli\u003eStore in a SYS-FIT PodDock or our SYS-ORG PodBin for grab-and-go deployment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cp\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS-GRP Workholding System\u003c\/a\u003e. Compatible with all SYS-GRP vacuum pod formats, Hub manifolds, and Nexus Baseplate surfaces unless otherwise noted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-GRP BenchGrip Minimus Single Port","offer_id":51145044558138,"sku":"GRP.BGP.MINIMS1.Q01.A.9005","price":28.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Single Port + Dual Port","offer_id":51238159155514,"sku":"GRP.BGP.MNMN12.Q01.A.9005","price":55.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Single Port - Qty 2","offer_id":51145044590906,"sku":"GRP.BGP.MINIMS1.Q02.A.9005","price":55.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Single Port - Qty 4","offer_id":51145044623674,"sku":"GRP.BGP.MINIMS1.Q04.A.9005","price":110.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Dual Port","offer_id":51237936267578,"sku":"GRP.BGP.MINIMS2.Q01.A.9005","price":28.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Dual Port - Qty 2","offer_id":51145044656442,"sku":"GRP.BGP.MINIMS2.Q02.A.9005","price":55.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Offset","offer_id":51237940003130,"sku":"GRP.BGP.MINIMSO.Q01.A.9005","price":28.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Minimus Offset - Qty 2","offer_id":51237941346618,"sku":"GRP.BGP.MINIMSO.Q02.A.9005","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/IMG_4286.jpg?v=1746126582"},{"product_id":"sys-grp-bench-grip-maximus-vacuum-pods","title":"SYS-GRP BenchGrip Maximus Vacuum Pods","description":"\u003cp\u003eSYS-GRP BenchGrip Maximus Pods deliver roughly three times the workholding capacity of Minimus Pods — designed for the standard 96mm dog-hole pattern on MFT-style benches with additional mounting options for demanding setups.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eBenchGrip Maximus Pod\u003c\/strong\u003e\u003cbr\u003eRoughly three times the workholding capacity of a Minimus Pod — 90mm tall × 185mm wide (3.5 in × 7.25 in). Designed for the standard 96mm dog-hole pattern with additional mounting options via M6\/M8 adapter.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Maximus Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(2) M6 × 20mm Flanged Button Head Fasteners\u003c\/li\u003e\n\u003cli\u003e(2) SYS-GRP Rail Inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBenchGrip Maximus Offset Pod\u003c\/strong\u003e\u003cbr\u003eRelocated mounting holes for Dash-Board PWS and vertical extrusion profiles where clearance below the surface matters. Same size and holding power as the standard Maximus Pod.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Maximus Offset Mount Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(2) M6 × 20mm Flanged Button Head Fasteners\u003c\/li\u003e\n\u003cli\u003e(2) SYS-GRP Rail Inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMaximus + Minimus Dual Bundle\u003c\/strong\u003e\u003cbr\u003eA two-pod setup that pairs one Maximus with one Minimus for flexible coverage across mixed-size workpieces and varied setups.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Maximus Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(1) SYS-GRP BenchGrip Minimus Vacuum Pod\u003c\/li\u003e\n\u003cli\u003e(3) M6 × 20mm Flanged Button Head Fasteners\u003c\/li\u003e\n\u003cli\u003e(3) SYS-GRP Rail Inserts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eIncreased Surface Area:\u003c\/strong\u003e Significantly more workholding coverage than Minimus Pods for larger workpieces and heavier-duty operations.\u003cbr\u003e\u003cstrong\u003eDog Hole Compatible:\u003c\/strong\u003e Works with SYS-GRP AnchorDog clamping bench dogs (sold separately) or other compatible dogs accepting an M6 fastener from the top — TSO, UJK, Benchdogs UK, and similar systems.\u003cbr\u003e\u003cstrong\u003eM8 Adapter Option:\u003c\/strong\u003e M6 fastener with M8 threaded adapter available separately for additional mounting versatility.\u003c\/p\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with budget vacuum pumps, VacuPress Compact 150 and larger, and Grabo Pro-Lifter \/ DeWalt Grabo (with SYS-GRP Grabo Pro Adapter Kit)\u003c\/li\u003e\n\u003cli\u003eMFT-style benches with standard 96mm dog hole pattern\u003c\/li\u003e\n\u003cli\u003ePairs with SYS-GRP Nexus Baseplate for portable vacuum workholding\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003eStore in a SYS-FIT PodDock or our SYS-ORG PodBin for grab-and-go deployment\u003c!-- notionvc: 273e8ad3-82e6-4bca-ae2e-6814355f843c --\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cp\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS-GRP Workholding System\u003c\/a\u003e. Compatible with all SYS-GRP vacuum pod formats, Hub manifolds, and Nexus Baseplate surfaces unless otherwise noted.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-GRP BenchGrip Maximus","offer_id":51236997202234,"sku":"GRP.BGP.MAXIMUS.Q01.A.9005","price":38.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Maximus + Minimus Dual Port","offer_id":51236997235002,"sku":"GRP.BGP.MXMNDP.Q01.A.9005","price":65.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip Maximus Offset","offer_id":53307272855866,"sku":"GRP.BGP.MAXIOFF.Q01.A.9005","price":38.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/IMG_4289.jpg?v=1746120420"},{"product_id":"sys-fit-side-rail-mount-smr-rack","title":"SYS-FIT Side Mount Rail (SMR) Rack","description":"\u003cp\u003eKeeping an uncluttered horizontal work surface in a shop borders on impossible.  The only thing that may rival it is finding a tape measure or the fastener you just took out or the bit you needed or.... \u003c\/p\u003e\n\u003cp\u003eWith our SYS-FIT - Side Mount Rack (SMR) Rack we wanted to tackle as many of these workflow challenges as we could.  Built with flexibility and modularity in mind, the base rack has storage for four bench dogs, four MFT \/ Track style clamps, a Paolini style pocket rule and a magnetic accessory tray.  Adaptable to most commercial available extrusion profiles, including 15 \/ 30 \/ 40 \/ 45 series extrusion, Festool MFT, Dashboard PWS, Tracktubes, etc with provided hardware... But that is just the beginning.\u003c\/p\u003e\n\u003cp\u003eEnter our modular pods... ModPods. Designed to work with our \u003cmeta charset=\"utf-8\"\u003eSMR and Shaper Accessory racks as well as all of our SYS-PLT mounts.  Each of our racks accept the attachment of two different ModPods to each end pods allowing you to quickly attach different accessories to fit your workshop, workflows or job site. \u003c\/p\u003e\n\u003cp\u003eAvailable ModPods:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtractor Hose \u0026amp; Measuring Tape Magnetic ModPod\u003c\/li\u003e\n\u003cli\u003ePica Pencil \/ Marker ModPod\u003c\/li\u003e\n\u003cli\u003eFestool FastFix ModPod\u003c\/li\u003e\n\u003cli\u003eCountersink ModPod\u003c\/li\u003e\n\u003cli\u003eCaliper ModPod\u003c\/li\u003e\n\u003cli\u003eRouter Bit ModPod\u003c\/li\u003e\n\u003cli\u003eSYS-ORG 50mm x 75mm Bin ModPod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn addition to our base rack and our ModPods, we also have a SYS-FIT Side Mount Extender (SME) Rack that allows a variety of squares, rules, etc to be stored behind the SMR for quick out the way access to your most critical measuring and squaring tools.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eOrder \u003ca rel=\"noopener\" href=\"https:\/\/forg3d.store\/products\/sys-fit-modular-pods-modpod-accessory-mounts\" target=\"_blank\"\u003eModPods here\u003c\/a\u003e or if you have a suggestion or need, don't hesitate to reach out.\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-FIT - Side Mount Rail (SMR) Rack","offer_id":51327899861306,"sku":"FIT.SMR.STDRACK.Q01.A.9005","price":42.0,"currency_code":"USD","in_stock":true},{"title":"SYS-FIT - Side Mount Extender (SME) Rack","offer_id":51327899894074,"sku":"FIT.SMR.EXTENDER.Q01.A.9005","price":16.0,"currency_code":"USD","in_stock":true},{"title":"SYS-FIT - Side Mount Rail (SMR) + Side Mount Extender (SME) Racks","offer_id":51327899926842,"sku":"FIT.SMR.RACKEX.Q01.A.9005","price":54.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/IMG_4490.jpg?v=1747956722"},{"product_id":"sys-fit-shaper-accessory-rail-sar-rack","title":"SYS-FIT Shaper Accessory Rail (SAR) Rack","description":"\u003cp\u003eThe Shaper Origin is an amazing tool and maybe even a more amazing piece of technology.  What it brings to the workshop or job site is unique and opens up a world of customization and creative options... But it also brings with it a lot of bits and bobs that can take over a work surface.\u003c\/p\u003e\n\u003cp\u003eWith our SYS-FIT - Shaper Accessory Rail (SAR) Rack we get these bits and bobs out of the way, but ready at hand. Available in two variants, Minimus and Maximus, our SYS-FIT SAR Rack has storage for all the most critical Origin accessories... Hex wrench, collet wrench, flat pry bar, Shaper USB stick and of course a roll of ShaperTape.  And with the Maximus version we also allow storage of a secondary Origin SM1 Spindle for the ultimate Origin workflow hack.\u003c\/p\u003e\n\u003cp\u003eNeed to have more accessories within arms reach?  Enter our modular pods... ModPods. Designed to work with our SAR and Side Mount Rail racks as well as all of our SYS-PLT mounts.  Each of our racks accept the attachment of two different ModPods to each end pods allowing you to quickly attach different accessories to fit your workshop, workflows or job site. \u003c\/p\u003e\n\u003cp\u003eAvailable ModPods:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCaliper ModPod\u003c\/li\u003e\n\u003cli\u003eRouter Bit ModPod\u003c\/li\u003e\n\u003cli\u003eMagnetic ModPod\u003c\/li\u003e\n\u003cli\u003ePica Pencil \/ Marker ModPod\u003c\/li\u003e\n\u003cli\u003eFestool FastFix ModPod\u003c\/li\u003e\n\u003cli\u003eCountersink ModPod\u003c\/li\u003e\n\u003cli\u003eSYS-ORG 50mm x 75mm Bin ModPod\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOrder \u003ca rel=\"noopener\" href=\"https:\/\/forg3d.store%20%E2%80%BA%20products%20%E2%80%BA%20sys-fit-modular-pods-modpod-accessory-mounts\" target=\"_blank\"\u003eModPods here\u003c\/a\u003e or if you have a suggestion or need, don't hesitate to reach out.\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-FIT - SAR Rack Minimus","offer_id":51334389104954,"sku":"FIT.SAR.MINIMUS.Q01.A.9005","price":38.0,"currency_code":"USD","in_stock":true},{"title":"SYS-FIT - SAR Rack Maximus","offer_id":51334389137722,"sku":"FIT.SAR.MAXIMUS.Q01.A.9005","price":42.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/5692B50C-0768-46A6-A80B-E1BCE805C844_1_201_a_c89cbb9f-f033-4042-84d3-dc2114f4ac5b.heic?v=1747957297"},{"product_id":"anchorpod-precision-engineered-workholding-solution","title":"SYS-GRP AnchorPod — Precision-Engineered Workholding Solution","description":"\u003cp\u003eAnchorPod puts the workholding inside the bench — a patent‑pending vacuum anchor that drops into your 20 mm (MFT) or 3\/4 in dog hole so the surface stays clear and the setup stays repeatable.\u003c\/p\u003e\n\u003cp\u003eSYS‑GRP AnchorPod is built for makers who are tired of clamps and top‑mounted pods getting in the way of toolpaths and workflow. It combines benchdog‑style mechanical anchoring with gasket‑sealed vacuum holding, then scales into pod integration when you want elevation, coverage, or modular arrays.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003eAnchorPod is offered as \u003cstrong\u003eCore\u003c\/strong\u003e (the platform) or \u003cstrong\u003eFoundation\u003c\/strong\u003e (the ready‑to‑run starter kit). Pick Core if you’re building around existing vacuum hardware and you want maximum flexibility; pick Foundation if you want the sealing, spacing, and hose management handled up front so you can get to first hold fast.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSYS‑GRP AnchorPod Core\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCore is the bench‑integrated AnchorPod platform for builders who want to design their own setup. Choose your surface standard (20 mm or 3\/4 in), install it in the grid, then configure the workflow you need: mechanical anchoring for repeatable registration, gasket‑sealed vacuum holding for clear toolpaths, or pod integration when you want elevation and modular arrays.\u003c\/p\u003e\n\u003cp\u003eIf you already run a vacuum source, have preferred gasket material, or you’re dialing in a dedicated jig, Core keeps the system open and lets you tune performance around your bench and materials.\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003e(1) AnchorPod base (20 mm or 3\/4 in variant)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSYS‑GRP AnchorPod Foundation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFoundation is the fastest path to a clean, repeatable AnchorPod workflow. It includes the sealing and setup components that make vacuum workholding feel predictable — so you can mount the anchor, dial the seal, and start holding parts without hunting for the right gasket stock or hose routing.\u003c\/p\u003e\n\u003cp\u003eChoose Foundation when you want to validate the system quickly, standardize your setup across benches, or you’re building toward future pod integration with a known‑good baseline.\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003e(1) AnchorPod base (20 mm or 3\/4 in variant)\u003c\/li\u003e\n\t\u003cli\u003e(2) Gaskets + spacers\u003c\/li\u003e\n\t\u003cli\u003e1500 mm vacuum tubing\u003c\/li\u003e\n\t\u003cli\u003eT-handle installation tool\u003c\/li\u003e\n\t\u003cli\u003ePE foam insert sized for a Systainer³ S 76\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eBench‑integrated anchor:\u003c\/strong\u003e Locates and anchors through the hole grid to keep toolpaths clear for routing, sanding, and assembly.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eOne platform, three modes:\u003c\/strong\u003e AnchorDog mode (mechanical registration), Gasket mode (direct-to-surface vacuum seal), and Pod Integration mode (AnchorPod‑Edition pods).\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eHybrid architecture:\u003c\/strong\u003e A precision‑machined vacuum base paired with an additively manufactured interface for sealing and anchoring behavior.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eSystem‑first scalability:\u003c\/strong\u003e Designed to expand into the broader SYS‑GRP ecosystem as your setups grow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/forg3d.store\/products\/sys-grp-anchorpod-forg3d-edition\"\u003eSYS‑GRP AnchorPod — FORG3D Edition\u003c\/a\u003e builds the system out — AnchorPods, Edition pods, Argos, and a ready fitout.\u003c\/p\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eCompatible with \u003cstrong\u003e20 mm (MFT‑style)\u003c\/strong\u003e and \u003cstrong\u003e3\/4 in\u003c\/strong\u003e hole grids.\u003c\/li\u003e\n\t\u003cli\u003eVacuum resists lift; when lateral load (shear) matters, use registration \/ mechanical stops.\u003c\/li\u003e\n\t\u003cli\u003eVacuum performance depends on sealing quality and surface flatness.\u003c\/li\u003e\n\t\u003cli\u003eNeed setup help or detailed usage guidance? See the \u003ca href=\"https:\/\/support.forg3d.store\/sys-grp-anchorpod\/6KNncfixPm8iy6JBk7edb2\/sys-grp-anchorpod-%E2%80%94-overview--faq\/6KHPtmL2fTawt8buQzwaF2\"\u003eAnchorPod Guide \u0026amp; FAQ\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS‑GRP Workholding System\u003c\/a\u003e.\u003c\/li\u003e\n\t\u003cli\u003eEngineering deep dives:\n\t\t\u003cul\u003e\n\t\t\t\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/deep-dive-anchorpod-engineering-workholding-into-the-bench\"\u003eDeep Dive: AnchorPod\u003c\/a\u003e\u003c\/li\u003e\n\t\t\t\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/anchorpod-patent-pending-workholding-without-limits\"\u003eAnchorPod: Patent-Pending Workholding Without Limits\u003c\/a\u003e\u003c\/li\u003e\n\t\t\t\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/anchorpod-the-forg3d-launch-edition-a-new-era-of-workholding\"\u003eAnchorPod + The FORG3D Launch Edition: A New Era of Workholding\u003c\/a\u003e\u003c\/li\u003e\n\t\t\u003c\/ul\u003e\n\t\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat surfaces work best with AnchorPod?\u003c\/strong\u003e Smooth, flat, low‑porosity surfaces deliver the strongest seal and the most predictable holding. Highly porous, soft, or uneven tops can leak and reduce performance; if you’re working on a perforated or porous top, plan on sealing adjacent holes or using a spoilboard to improve the seal.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat vacuum sources are compatible?\u003c\/strong\u003e AnchorPod works with common vacuum workholding sources as long as you can maintain a stable seal and appropriate vacuum level for your material and contact area. For recommendations on pump types, fittings, and real‑world setup guidance, use the \u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/choosing-the-right-vacuum-source-for-sys-grp-workholding\"\u003eVacuum Source Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need bench dogs for AnchorPod to work?\u003c\/strong\u003e No. AnchorPod provides vacuum down‑force on its own. Dogs are optional — they’re most useful for indexing, anti‑rotation, and mechanical stops when lateral load (shear) matters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat if it won’t hold?\u003c\/strong\u003e Start with the basics: clean the gasket and work surface, verify the part is flat, and listen for leaks. If the surface is porous or the workpiece is warped, you may need a spoilboard, additional pods, or mechanical registration. Vacuum workholding resists lift; if you’re seeing slip, add a stop and reduce side‑loads.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-GRP AnchorPod Core - 20 mm","offer_id":51873273577786,"sku":"GRP.APD.CORE20.Q01.A.7625","price":36.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP AnchorPod Foundation - 20 mm","offer_id":51873273610554,"sku":"GRP.APD.FNDN20.Q01.A.7625","price":58.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP AnchorPod Core - 3\/4 in","offer_id":51948911526202,"sku":"GRP.APD.CORE75.Q01.A.7625","price":36.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP AnchorPod Foundation - 3\/4 in","offer_id":51948911558970,"sku":"GRP.APD.FNDN75.Q01.A.7625","price":58.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/anchorPod_plug-276.jpg?v=1759282653"},{"product_id":"sys-grp-bench-grip-set-verso-max","title":"SYS-GRP BenchGrip — FORG3D Edition","description":"\u003cp\u003eMost vacuum workholding starts as a parts list. BenchGrip Sets arrive as a system — three configurations curated for bench-to-rail, Dash-Board PWS, and heavy-panel workflows, each packed in a FORG3D Edition Systainer³ S 76 with PodDock fitout.\u003c\/p\u003e\n\u003cp\u003eThe curation is the point. Each set ships with a pod mix matched to a specific workholding priority, rail inserts and AnchorDogs already included, tubing and fittings staged in the fitout — so setup starts at the bench, not at the parts bin.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003eThree configurations, each built around a different workholding priority. Pick Verso for bench-plus-rail flexibility; pick Verso Dash if your setup runs Dash-Board PWS or dual-channel extrusion; pick Max when you're holding larger panels and holding force is the priority.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Verso Configuration\u003c\/strong\u003e\u003cbr\u003eVerso is built for the shop where the next job could be anything — a wide panel on the bench or a rail-guided cut along an extrusion. The pod mix covers both: Maximus for broad hold-down, Minimus Singles for targeted placement, and the Dual for middle-ground coverage. If you need one kit that follows the work rather than dictating it, Verso is the default.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Minimus Single Pods\u003c\/li\u003e\n\u003cli\u003e(1) Minimus Dual Pod\u003c\/li\u003e\n\u003cli\u003e(1) Maximus Pod\u003c\/li\u003e\n\u003cli\u003e(6) AnchorDogs — 20 mm\u003c\/li\u003e\n\u003cli\u003e(6) M6 Rail Inserts\u003c\/li\u003e\n\u003cli\u003e(1) SYS-FIT PodDock fitout\u003c\/li\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76\u003c\/li\u003e\n\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Verso Dash Configuration\u003c\/strong\u003e\u003cbr\u003eVerso Dash is for the maker running a Dash-Board PWS or dual-channel extrusion system who needs pods to mount below the surface, not just beside it. Offset Pods are what make this work — standard Minimus pods can't reach the workpiece geometry where Offset pods slot naturally. If you're already on that infrastructure, this is the configuration built for it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Minimus Offset Pods\u003c\/li\u003e\n\u003cli\u003e(1) Minimus Single Pod\u003c\/li\u003e\n\u003cli\u003e(1) Minimus Dual Pod\u003c\/li\u003e\n\u003cli\u003e(1) Maximus Pod\u003c\/li\u003e\n\u003cli\u003e(6) AnchorDogs — 20 mm\u003c\/li\u003e\n\u003cli\u003e(6) M6 Rail Inserts\u003c\/li\u003e\n\u003cli\u003e(1) SYS-FIT PodDock fitout\u003c\/li\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76\u003c\/li\u003e\n\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Max Configuration\u003c\/strong\u003e\u003cbr\u003eMax is optimized for larger panels and heavier operations where contact area is the priority. Two Maximus pods anchor broad hold-down; two Minimus Duals fill coverage across the workpiece. The trade-off is specialization — Max is a bench configuration, not a rail-versatility kit. If most of your work is \"put the panel down and hold it,\" Max is the right call.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Maximus Pods\u003c\/li\u003e\n\u003cli\u003e(2) Minimus Dual Pods\u003c\/li\u003e\n\u003cli\u003e(6) AnchorDogs — 20 mm\u003c\/li\u003e\n\u003cli\u003e(6) M6 Rail Inserts\u003c\/li\u003e\n\u003cli\u003e(1) SYS-FIT PodDock fitout\u003c\/li\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76\u003c\/li\u003e\n\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurated pod mix:\u003c\/strong\u003e Each configuration ships with a pre-selected combination matched to its workholding priority — no guesswork on what to order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-deploy storage:\u003c\/strong\u003e Every set includes a FORG3D Edition Systainer³ S 76 with PodDock fitout — pods organized, fittings staged, ready to roll out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail and bench compatible:\u003c\/strong\u003e M6 rail inserts and AnchorDogs included in every set for both extrusion-mounted and dog-hole workholding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-first design:\u003c\/strong\u003e All pod formats integrate with SYS-GRP Hub manifolds, Nexus Baseplate surfaces, and BenchGrip Brackets for vertical orientation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"notion-callout\"\u003e\n\u003cp\u003e\u003cstrong\u003eAdd bench-edge control.\u003c\/strong\u003e BenchGrip Sets route vacuum to the pods — \u003ca href=\"https:\/\/forg3d.store\/products\/sys-grp-hub-control-your-workholding\"\u003eSYS-GRP Hub\u003c\/a\u003e adds valve switching and quick-release at the rail edge so you can engage, isolate, and purge without stepping back to the source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum pump not included — compatible with budget vacuum pumps, VacuPress Compact 150 and larger, and Grabo \/ DeWalt Grabo (with SYS-GRP adapter)\u003c\/li\u003e\n\u003cli\u003ePod mix varies by set configuration; see Build Your System above for exact contents of each set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShips with a \u003ca href=\"https:\/\/forg3d.store\/products\/forg3d-edition-s-76-systainer\"\u003eSystainer³ S 76\u003c\/a\u003e with PodDock fitout — available directly from FORG3D.\u003c\/li\u003e\n\u003cli\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS-GRP Workholding System\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eLearn more:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/anchorpod-vs-verso-max-bundles-which-vacuum-workholding-system-to-choose\"\u003eAnchorPod vs Verso Max Bundles: Which Vacuum Workholding System to Choose\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/vacuum-workholding-the-foundation-of-modern-precision\"\u003eVacuum Workholding: The Foundation of Modern Precision\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich set is right for me — Verso, Verso Dash, or Max?\u003c\/strong\u003e\u003cbr\u003eStart with your infrastructure. If your bench runs Dash-Board PWS or dual-channel extrusion, Verso Dash is the only configuration with Offset Pods — that's not interchangeable with the other sets. Between Verso and Max, the question is versatility vs. hold-down force: Verso covers bench and rail; Max is optimized for larger panels where contact area matters more than flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a vacuum pump?\u003c\/strong\u003e\u003cbr\u003eYes — no pump is included with any BenchGrip Set. The sets are compatible with budget continuous-duty pumps, VacuPress Compact 150 and larger, and Grabo \/ DeWalt Grabo with the SYS-GRP adapter. If you're unsure which pump to pair with your setup, see the \u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/choosing-the-right-vacuum-source-for-sys-grp-workholding\"\u003eVacuum Source Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are Minimus Offset Pods and why are they only in Verso Dash?\u003c\/strong\u003e\u003cbr\u003eOffset Pods are designed for Dash-Board PWS and dual-channel extrusion setups with 3\/4 in thick work surfaces — they sit flush with the surface rather than proud of it, so they can stay installed without interfering with routing, sanding, or other surface operations. That always-in-place behavior is the point: no pulling pods before a pass, no breaking down the setup to do the next operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add more pods or expand the set later?\u003c\/strong\u003e\u003cbr\u003eYes. All pod formats — Minimus Single, Dual, Offset, and Maximus — are available individually and are interchangeable within the SYS-GRP system. The PodDock fitout in the Systainer³ S 76 accommodates additional pods as your system grows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Systainer³ S 76 fit on a standard Systainer stack?\u003c\/strong\u003e\u003cbr\u003eYes. The FORG3D Edition Systainer³ S 76 is T-LOC compatible and stacks with Systainer³ M-series and other T-LOC format Systainers. The PodDock fitout is precision-sized for the S 76 interior — pods, tubing, and fittings stay organized in transit and on the bench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-GRP BenchGrip — Verso FORG3D Edition","offer_id":51944638415162,"sku":"GRP.BGP.VERSO.Q01.A.9005","price":275.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip — Verso Dash FORG3D Edition","offer_id":52161179615546,"sku":"GRP.BGP.VDASH.Q01.A.9005","price":275.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip — Max FORG3D Edition","offer_id":51944638447930,"sku":"GRP.BGP.MAXSET.Q01.A.9005","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/nexusDockLaunch_sept2025-158.jpg?v=1759283468"},{"product_id":"sys-grp-hub-control-your-workholding","title":"SYS-GRP Hub - Control Your Workholding","description":"\u003cp\u003eControl your workholding. Drop your anchor. Route, release, keep flow.\u003c\/p\u003e\n\u003cp\u003eHub brings valve routing and quick‑release to the bench edge — clean under‑rail integration or front‑face mounting with Wings. Engineered to expand as your vacuum workholding needs grow, Hub pairs standardized routing with bench‑edge panels for reliable, repeatable installs in the shop or on the jobsite.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eHub Prime:\u003c\/strong\u003e Full bench‑edge control with expanded zone switching out of the box. Wings + Valve Panel Quad + Release Panel gives you broader control from day one with more room to route, isolate, and reset across the bench. Start here if you want a more complete multi-zone setup from the start.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHub Wings (rail inserts + brackets + harness hardware)\u003c\/li\u003e\n\u003cli\u003eValve Panel Quad\u003c\/li\u003e\n\u003cli\u003eRelease Panel\u003c\/li\u003e\n\u003cli\u003e5‑port manifold\u003c\/li\u003e\n\u003cli\u003eVacuum tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHub Foundation:\u003c\/strong\u003e Full bench‑edge control, ready to work. Wings + Valve Panel Duo + Release Panel puts zone routing and quick‑release at your fingertips from day one. Install under‑rail for a clean face or front‑mount with the included Wings. Start here if your pod count is already defined.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHub Wings (rail inserts + brackets + harness hardware)\u003c\/li\u003e\n\u003cli\u003eValve Panel Duo\u003c\/li\u003e\n\u003cli\u003eRelease Panel\u003c\/li\u003e\n\u003cli\u003e5‑port manifold\u003c\/li\u003e\n\u003cli\u003eVacuum tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHub Core:\u003c\/strong\u003e Essential release‑first setup. Wings + Release Panel for fast bench‑edge purge and reset. Start here to establish the mounting infrastructure, then add Valve Panels (Solo, Duo, Trio, Quad, or Quint) as your workflow grows. Same under‑rail or front‑face options, same routing standard — minimal friction either way.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHub Wings (rail inserts + brackets + harness hardware)\u003c\/li\u003e\n\u003cli\u003eRelease Panel\u003c\/li\u003e\n\u003cli\u003e5‑port manifold\u003c\/li\u003e\n\u003cli\u003eVacuum tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHub Valve Panels\u003c\/strong\u003e \u003cem\u003e(sold separately)\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHub — Valve Panel Solo — panel only\u003c\/li\u003e\n\u003cli\u003eHub — Valve Panel Duo — panel only\u003c\/li\u003e\n\u003cli\u003eHub — Valve Panel Trio — panel only\u003c\/li\u003e\n\u003cli\u003eHub — Valve Panel Quad — panel only\u003c\/li\u003e\n\u003cli\u003eHub — Valve Panel Quint — panel only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHub Accessories\u003c\/strong\u003e \u003cem\u003e(sold separately)\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHub — DashboardPWS Adapter — mounts Hub Wings to DashboardPWS (fasteners included; panel hardware not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv style=\"border-left: 4px solid #E75838; background-color: rgba(231, 88, 56, 0.08); padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cp style=\"margin: 0 0 6px 0;\"\u003e\u003cstrong\u003eImportant: Valve bodies and release mechanisms are not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"margin: 0;\"\u003eHub panels and bundles include bench‑edge mount panels and routing kit only. Compatible Valve and Release options and installation guidance are available in the \u003ca href=\"https:\/\/support.forg3d.store\/sys-grp-general\/6Kmpnb4nnBoQzCQhG8BMGy\/sys-grp-hub-overview--configuration\/qkCTCpvZnx5zjSyuAtyudx\" target=\"_blank\" title=\"SYS-GRP Hub: Overview \u0026amp; Configuration\" rel=\"noopener\"\u003eproduct knowledge base\u003c\/a\u003e.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eClean integration:\u003c\/strong\u003e Under‑rail or front‑face mounting keeps the bench surface clear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandardized routing:\u003c\/strong\u003e 5‑port manifold + pre‑cut tubing makes installs repeatable across every Hub configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpandable by design:\u003c\/strong\u003e Add Valve Panels (Solo\/Duo\/Trio\/Quad\/Quint) as your system and pod count evolve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBenchGrip‑compatible rails:\u003c\/strong\u003e Fits the same aluminum extrusion profiles you already use.\u003c\/p\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFits all BenchGrip‑supported aluminum extrusion rails\u003c\/li\u003e\n\u003cli\u003eHub Wings use M5 low‑profile hardware for a slimmer profile\u003c\/li\u003e\n\u003cli\u003eUnder‑rail (hidden) or front‑face mounting options\u003c\/li\u003e\n\u003cli\u003eValve bodies and release mechanisms are not included with Hub panels or Hub bundles. Hub provides bench‑edge mount panels and routing kit only.\u003c\/li\u003e\n\u003cli\u003eCompatible valve and release options and installation guidance available in the product knowledge base.\u003c\/li\u003e\n\u003cli\u003eSetup and usage details available in the Hub Guide \u0026amp; FAQ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cp\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS-GRP Workholding System\u003c\/a\u003e. Compatible with all SYS-GRP vacuum pod formats, Hub manifolds, and Nexus Baseplate surfaces unless otherwise noted.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDo panels include brackets or harness hardware?\u003c\/strong\u003e No. Wings carry rail inserts, brackets, and harness hardware. Panels ship with routing kit per variant.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes Solo include a manifold?\u003c\/strong\u003e Solo includes tubing only. Duo\/Trio\/Quad\/Quint and Release include a 5‑port manifold and tubing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs DashboardPWS supported?\u003c\/strong\u003e Yes, with the Hub — DashboardPWS Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes my extrusion need a bottom channel for under‑rail mounting?\u003c\/strong\u003e Yes. Under‑bench mounting with rail inserts requires an extrusion with a bottom channel. If your rail lacks a bottom channel, use front‑face mounting with Wings or the DashboardPWS Adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre valve bodies and releases included?\u003c\/strong\u003e No. Hub provides the bench‑edge panels and routing kit. Compatible Valve and Release options will be linked here and covered in a knowledge base article.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"Hub Prime — Quad + Release + Wings + Hardware + Accessories","offer_id":53142398435642,"sku":"GRP.HUB.PRME.Q01.A.2003","price":56.0,"currency_code":"USD","in_stock":true},{"title":"Hub Foundation — Duo + Release + Wings + Hardware + Accessories","offer_id":52026180665658,"sku":"GRP.HUB.FNDN.Q01.A.2003","price":48.0,"currency_code":"USD","in_stock":true},{"title":"Hub Core — Release + Wings + Hardware + Accessories","offer_id":52026180698426,"sku":"GRP.HUB.CORE.Q01.A.2003","price":36.0,"currency_code":"USD","in_stock":true},{"title":"Hub — Valve Panel Solo — panel + tubing","offer_id":52026180731194,"sku":"GRP.HUB.PNLSOLO.Q01.A.2003","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Hub — Valve Panel Duo — panel + tubing","offer_id":52026180763962,"sku":"GRP.HUB.PNLDUO.Q01.A.2003","price":22.0,"currency_code":"USD","in_stock":true},{"title":"Hub — Valve Panel Trio — panel + tubing","offer_id":52026180796730,"sku":"GRP.HUB.PNLTRIO.Q01.A.2003","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Hub — Valve Panel Quad — panel + tubing","offer_id":52026180829498,"sku":"GRP.HUB.PNLQUAD.Q01.A.2003","price":26.0,"currency_code":"USD","in_stock":true},{"title":"Hub — Valve Panel Quint — panel + splitter + tubing","offer_id":53142318907706,"sku":"GRP.HUB.PNLQUIN.Q01.A.2003","price":28.0,"currency_code":"USD","in_stock":true},{"title":"Hub — Dashboard PWS Adapter","offer_id":52026180895034,"sku":"GRP.HUB.DBADPT.Q01.A.2003","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/sysGRP_switch-348.jpg?v=1760999293"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/collections\/dashboard.jpg?v=1785080201","url":"https:\/\/forg3d.store\/collections\/built-for-dash-board-pws.oembed","provider":"FORG3D Store","version":"1.0","type":"link"}