{"title":"Built for Systainer","description":"\u003cp\u003eThe Systainer ecosystem goes further than storage. SYS-SRF mounts directly to the stack and opens into a precision work surface. BenchGrip and AnchorPod add workholding on that surface. Grabo Fitout and Nexus Dock give every vacuum tool a dedicated, organized home inside a case.\u003c\/p\u003e","products":[{"product_id":"sys-fit-grabo-fitout-for-systainer3-m237","title":"SYS-FIT - Grabo Fitout for Systainer3 M 237","description":"\u003cp\u003eProtect your investment — and keep your Grabo kit jobsite-ready.\u003c\/p\u003e\n\u003cp\u003eSYS-FIT — Grabo Fitout for Systainer³ M 237 is built to carry and protect \u003cstrong\u003etwo Grabo \/ Grabo Pro lifters\u003c\/strong\u003e plus \u003cstrong\u003etwo spare batteries\u003c\/strong\u003e in one clean, repeatable kit. High-temperature thermoplastics provide the structure, while magnets and custom TPU saddles keep each unit protected to, from, and at the jobsite — and quick to retrieve when it’s time to get work done.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDual-lifter carry, one Systainer:\u003c\/strong\u003e Stores two units and two batteries without loose packing, improvised foam, or shifting gear.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMagnetic TPU saddles:\u003c\/strong\u003e Soft-contact support surfaces with positive retention — stable in transport, quick in use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for jobsite handling:\u003c\/strong\u003e High-temperature thermoplastics resist warping and cracking under real-world heat and impact.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFast retrieval:\u003c\/strong\u003e Everything has a defined position so you can open, grab, and go — no digging.\u003c\/p\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eRequires a Tanos \/ Festool \u003cstrong\u003eSystainer³ M 237\u003c\/strong\u003e\n\u003c\/li\u003e\n  \u003cli\u003eCompatible with \u003cstrong\u003eGrabo\u003c\/strong\u003e and \u003cstrong\u003eGrabo Pro\u003c\/strong\u003e lifters (units not included)\u003c\/li\u003e\n  \u003cli\u003eNot compatible with \u003cstrong\u003eDeWalt Grabo\u003c\/strong\u003e or \u003cstrong\u003eGrabo Pro Brushless\u003c\/strong\u003e units\u003c\/li\u003e\n  \u003cli\u003eFitout ships as the insert only — Systainer not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cp\u003eRequires a \u003ca href=\"https:\/\/forg3d.store\/products\/tanos-systainer3-m-237-for-sys-fit-grabo-fitout\"\u003eSystainer³ M 237\u003c\/a\u003e — available directly from FORG3D. See all \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-fit-fitouts\"\u003eSYS-FIT Fitouts\u003c\/a\u003e for interior Systainer solutions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"Without Systainer3 M 237","offer_id":48995479585082,"sku":"FIT.GRB.INSERT.Q01.A.9005","price":82.0,"currency_code":"USD","in_stock":true},{"title":"With Systainer3  M 237 (Sapphire Blue with Anthracite Latch)","offer_id":48995479617850,"sku":"FIT.GRB.SYS3INS.Q01.A.5003","price":186.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/DSC00525.jpg?v=1741896220"},{"product_id":"sys-fit-sys-plate-mounting-system","title":"SYS-PLT Mounting System","description":"\u003cp\u003eThe heart of our SYS-FIT system is a flexible mounting system, our SYS-PLT products. Instead of you having to adapt to our system, our SYS-PLT products fit to your job site or shop.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSYS-PLT - Systainer3 Mount - Slides directly into the front of your Systainer3 products for a secure and mobile mounting solution when horizontal surfaces are at a premium\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - MFT Minimus Mount - Utilizes only the lower MFT rail profile for a quick and sturdy mounting solution\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - MFT Maximus Mount - Utilizes the full MFT rail profile for a bullet-proof mounting solution for even the most demanding tasks\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - Dash-Board PWS Minimus Mount - Utilizes only single track in an extrusion profile track for a quick and sturdy mounting solution\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - Dash-Board PWS Maximus Mount - Utilizes both tracks in a dual extrusion profile for a robust mounting solution regardless of the task at hand\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - 15-Series Minimus Mount - Utilizes only single track in an extrusion profile track for a quick and sturdy mounting solution\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - 15-Series Maximus Mount - Utilizes both tracks in a dual extrusion profile for a robust mounting solution regardless of the task at hand\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - French Cleat Mount - Utilizes the venerable french cleat for an adaptable and quickly movable mounting solution, we've also included a fastener for positive attachment to the cleat\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - TrackTubes QuadTrack Minimus Mount - Utilizes only single row of fasteners in an extrusion profile track for a quick and sturdy mounting solution (Coming Soon)\u003c\/li\u003e\n\u003cli\u003eSYS-PLT - TrackTubes QuadTrack Maximus Mount - Utilizes both rows of fasteners in our SYS-FIT Rack system for a robust  connection regardless of the task at hand (Coming Soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAre you wandering the wilderness without a Systainer, an MFT, a workbench constructed out of 15-series aluminum extrusion. a Dash-Board PWS or haven't gone down the french cleat rabbit hole???  Well then no SYS-PLATE purchase is necessary, simply take our SYS-FIT products and screw them to whatever surface you fancy.\u003c\/p\u003e\n\u003cp\u003eEach SYS-PLT comes with the required M4 hardware and requires a 2.5mm Hex Driver.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have questions about our colors, please visit our \u003ca href=\"https:\/\/forg3d.store\/pages\/sys-fit-sys-org-color-palette-information\" title=\"SYS-FIT \u0026amp; SYS-ORG Color Palette Information\" target=\"_blank\"\u003eSYS-FIT \u0026amp; SYS-ORG Color Palette Information\u003c\/a\u003e page.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"FORG3D","offers":[{"title":"Matte Indigo Blue \/ SYS-PLT - Systainer3 Mount","offer_id":47676589637946,"sku":"PLT.SYS.MINIMUS.Q01.A.5003","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - MFT Minimus Mount","offer_id":47676589703482,"sku":"PLT.MFT.MINIMUS.Q01.A.5003","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - 15-Series Minimus Mount","offer_id":47676589834554,"sku":"PLT.15S.MINIMUS.Q01.A.5003","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - MFT Maximus Mount","offer_id":47676589769018,"sku":"PLT.MFT.MAXIMUS.Q01.A.5003","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - 15-Series Maximus Mount","offer_id":47676589900090,"sku":"PLT.15S.MAXIMUS.Q01.A.5003","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - French Cleat Mount","offer_id":47676589965626,"sku":"PLT.FCL.MINIMUS.Q01.A.5003","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - Dash-Board PWS Minimus Mount","offer_id":47717786222906,"sku":"PLT.DSH.MINIMUS.Q01.A.5003","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - Dash-Board PWS Maximus Mount","offer_id":47717786288442,"sku":"PLT.DSH.MAXIMUS.Q01.A.5003","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - Systainer3 Mount - Qty 2","offer_id":48441037685050,"sku":"PLT.SYS.MINIMUS.Q02.A.5003","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - MFT Maximus Mount - Qty 2","offer_id":48441037783354,"sku":"PLT.MFT.MAXIMUS.Q02.A.5003","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - 15-Series Maximus Mount - Qty 2","offer_id":48441037848890,"sku":"PLT.15S.MAXIMUS.Q02.A.5003","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Matte Indigo Blue \/ SYS-PLT - Dash-Board PWS Maximus Mount - Qty 2","offer_id":48441037914426,"sku":"PLT.DSH.MAXIMUS.Q02.A.5003","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - Systainer3 Mount","offer_id":47676589605178,"sku":"PLT.SYS.MINIMUS.Q01.A.9005","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - MFT Minimus Mount","offer_id":47676589670714,"sku":"PLT.MFT.MINIMUS.Q01.A.9005","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - 15-Series Minimus Mount","offer_id":47676589801786,"sku":"PLT.15S.MINIMUS.Q01.A.9005","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - MFT Maximus Mount","offer_id":47676589736250,"sku":"PLT.MFT.MAXIMUS.Q01.A.9005","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - 15-Series Maximus Mount","offer_id":47676589867322,"sku":"PLT.15S.MAXIMUS.Q01.A.9005","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - French Cleat Mount","offer_id":47676589932858,"sku":"PLT.FCL.MINIMUS.Q01.A.9005","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - Dash-Board PWS Minimus Mount","offer_id":47717786255674,"sku":"PLT.DSH.MINIMUS.Q01.A.9005","price":6.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - Dash-Board PWS Maximus Mount","offer_id":47717786321210,"sku":"PLT.DSH.MAXIMUS.Q01.A.9005","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - Systainer3 Mount - Qty 2","offer_id":48441037750586,"sku":"PLT.SYS.MINIMUS.Q02.A.9005","price":10.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - MFT Maximus Mount - Qty 2","offer_id":48441037816122,"sku":"PLT.MFT.MAXIMUS.Q02.A.9005","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - 15-Series Maximus Mount - Qty 2","offer_id":48441037881658,"sku":"PLT.15S.MAXIMUS.Q02.A.9005","price":18.0,"currency_code":"USD","in_stock":true},{"title":"Matte Black \/ SYS-PLT - Dash-Board PWS Maximus Mount - Qty 2","offer_id":48441037947194,"sku":"PLT.DSH.MAXIMUS.Q02.A.9005","price":18.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/DSC00428.jpg?v=1741915480"},{"product_id":"sys-rlz-systainer3-pro-rail-slides","title":"SYS-RLZ - Systainer3 Pro Rail Slides","description":"\u003cp\u003eFrustrated that you cannot access the contents of your Systainer3 when utilizing the available Festool \/ Tanos Systainer3 Rails?  Have a SYS-AZ Drawers and annoyed you can't employ a Systainer3 Rail easily in the same cabinet?  Introducing our SYS-RLZ - Systainer3 Pro Rail Slides to take your storage \u0026amp; organization to the next level.\u003c\/p\u003e\n\u003cp\u003eCreated to address the most common complaints of existing Systainer3 rails solutions, our SYS-RLZ - Systainer3 Pro Rail Slides allows you to slide the entire Systainer out of the cabinet and easily open the lid to access the contents or to be used in the existing Systainer3 rail modes so if you need both the Systainer \u0026amp; the contents to go mobile.\u003c\/p\u003e\n\u003cp\u003eAvailable in a SYS-RLZ Minimus variant to fit Systainer3 Rail widths (M - 418mm or L 530mm) \u0026amp; a SYS-RLZ Maximus variant to fit SYS-AZ drawer widths (427mm), SYS-RLZ Systainer3 Pro Rail Slides quickly and easily install using provided M6.3 x 18 mm Euro Screws.\u003c\/p\u003e\n\u003cp\u003eAcrylic templates are available to assist in the installation process, and when paired with either the \u003ca rel=\"noopener\" href=\"https:\/\/amzn.to\/45eXfBm\" target=\"_blank\"\u003eFestool 5mm Centrotec Self-Centering Bit\u003c\/a\u003e or the \u003ca rel=\"noopener\" href=\"https:\/\/amzn.to\/4ec7eeM\" target=\"_blank\"\u003eSnappy Tools 46005 - 5mm Shelf Pin Drill Guide\u003c\/a\u003e allow for a quick \u0026amp; seamless installation process.\u003c\/p\u003e\n\u003cp\u003eYou can find SYS-RLZ installation instructions \u003ca rel=\"noopener\" title=\"SYS-RLZ Installation Instructions\" href=\"https:\/\/forg3d.store\/pages\/sys-rlz-installation-guide\" target=\"_blank\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"FORG3D","offers":[{"title":"SYS-RLZ - Minimus Systainer3 Pro Rail Slides - Qty 3 Pairs","offer_id":48778393125178,"sku":"RLZ.PRO.MINIMUS.Q03.A.5003","price":66.0,"currency_code":"USD","in_stock":true},{"title":"SYS-RLZ - Maximus Systainer3 Pro Rail Slides - Qty 3 Pairs","offer_id":48778393157946,"sku":"RLZ.PRO.MAXIMUS.Q03.A.5003","price":72.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/IMG_2791.jpg?v=1741896118"},{"product_id":"sys-fit-nexus-dock-fitout-for-systainer3-sortainer-2-m337","title":"SYS-FIT Nexus Dock Fitout for Systainer3 Sortainer\/2 M337","description":"\u003cdiv\u003eThe SYS-FIT Nexus Dock transforms the Sortainer\/2 M 337 into a fully outfitted, grab-and-go workholding system. The custom insert secures your SYS-GRP Nexus baseplate with your Grabo or DeWalt Grabo attached, so the entire setup is ready for immediate deployment. The larger drawer provides space for a spare battery and a SYS-GRP Minimus Bracket, while the smaller drawer can be outfitted with our SYS-ORG bins, perfectly sized to store your Minimus or Maximus pods.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eVariants\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eChoose the version that matches your vacuum source for a perfect fit:\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNexus Dock – Grabo Edition\u003c\/strong\u003e – Designed to hold the SYS-GRP Nexus baseplate with a Grabo Pro-Lifter 20 attached\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNexus Dock – DeWalt Edition\u003c\/strong\u003e – Designed to hold the SYS-GRP Nexus baseplate with a DeWalt Grabo attached\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMade for Sortainer\/2 M 337\u003c\/strong\u003e – Precision fit for the two-drawer Sortainer — no modification required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eQuick-Deploy Storage\u003c\/strong\u003e – Keeps the Nexus and vacuum source together and ready to use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOrganized Accessory Bays\u003c\/strong\u003e – Space for a spare battery and SYS-GRP Minimus Bracket in the large drawer\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eCustomizable Second Drawer\u003c\/strong\u003e – Outfit with SYS-ORG bins for secure Minimus or Maximus pod storage\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eSYS-FIT Compatible\u003c\/strong\u003e – Works seamlessly with your Systainer stack and other SYS-FIT modules\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBuilt for the Shop \u0026amp; Site\u003c\/strong\u003e – Impact-resistant construction for years of heavy use\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFuture-Ready Layout\u003c\/strong\u003e – Room for future SYS-GRP expansions as your workflow grows\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e✅ Fits: Sortainer\/2 M 337 (two-drawer version)\u003c\/div\u003e\n\u003cdiv\u003e❌ Does Not Fit: Other Sortainer or Systainer³ SYS-M or SYS-L models\u003c\/div\u003e\n\u003cdiv\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cstrong\u003eWhat’s Included\u003c\/strong\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSYS-FIT Nexus Dock insert (select Grabo or DeWalt edition)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cem\u003eNote: SYS-GRP Nexus baseplate, Grabo\/DeWalt Grabo, SYS-ORG bins, and pods sold separately.\u003c\/em\u003e\u003c\/div\u003e","brand":"FORG3D","offers":[{"title":"Nexus Dock – Grabo Edition","offer_id":51824487891258,"sku":"FIT.NEX.GRBNOS2.Q01.A.9005","price":49.0,"currency_code":"USD","in_stock":true},{"title":"Nexus Dock – DeWalt Edition","offer_id":51824487924026,"sku":"FIT.NEX.DWLTS2.Q01.A.9005","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/636A750F-7DF5-4653-A43D-B22A09E33676_1_201_a.jpg?v=1756870304"},{"product_id":"sys-grp-anchorpod-forg3d-edition","title":"SYS-GRP AnchorPod — FORG3D Edition","description":"\u003cp\u003eAnchorPod FORG3D Edition is built to make vacuum workholding always ready — bench‑anchored, hose‑free on the surface, and repeatable from the first setup.\u003c\/p\u003e\n\u003cp\u003eSYS‑GRP AnchorPod — FORG3D Edition is the complete, ready‑to‑run AnchorPod system: a curated kit designed as a clean, standardized setup you can install and rely on.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003eFORG3D Edition comes in two configurations — \u003cstrong\u003eMaximus\u003c\/strong\u003e and \u003cstrong\u003eMagnus\u003c\/strong\u003e. Pick Maximus for a versatile day‑to‑day bench kit; pick Magnus when you want broader coverage and a more “drop it and go” hold‑down feel on larger parts. Both follow the same system logic: the AnchorPods stay installed in the grid, and vacuum workholding stays ready.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Maximus Configuration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMaximus is designed for frequent horizontal bench work where you want fast setup, clear toolpaths, and repeatable placement without rebuilding the system each time. If most of your work is “grab the part, seal it, go,” Maximus is the default.\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003e(2) SYS‑GRP AnchorPods — 20 mm\u003c\/li\u003e\n\t\u003cli\u003e(2) SYS‑GRP AnchorPod Edition Maximus Pods\u003c\/li\u003e\n\t\u003cli\u003e(1) SYS‑GRP Argos — bench driver tool\u003c\/li\u003e\n\t\u003cli\u003e(2) SYS‑GRP AnchorDogs — 20 mm (registration \/ mechanical stops)\u003c\/li\u003e\n\t\u003cli\u003e(1) FORG3D Edition Systainer³ S 76 with precision fitout\u003c\/li\u003e\n\t\u003cli\u003e(2) Pod balancing spacers\u003c\/li\u003e\n\t\u003cli\u003eFoam gasket + balancing elements (EPDM)\u003c\/li\u003e\n\t\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Magnus Configuration\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMagnus extends reach and confidence for larger panels and demanding operations where stability is non‑negotiable. BenchPups add precise mechanical registration for the Magnus pod so alignment stays fast — and when shear matters, the system has the stops built in.\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003e(1) SYS‑GRP AnchorPod — 20 mm\u003c\/li\u003e\n\t\u003cli\u003e(1) SYS‑GRP AnchorPod Edition Magnus Pod\u003c\/li\u003e\n\t\u003cli\u003e(1) SYS‑GRP Argos — bench driver tool\u003c\/li\u003e\n\t\u003cli\u003e(4) SYS‑GRP AnchorDogs — 20 mm (registration \/ mechanical stops)\u003c\/li\u003e\n\t\u003cli\u003e(2) SYS‑GRP BenchPups — low‑profile 20 mm dogs for Magnus alignment\u003c\/li\u003e\n\t\u003cli\u003e(1) FORG3D Edition Systainer³ S 76 with precision fitout\u003c\/li\u003e\n\t\u003cli\u003e(4) Pod balancing spacers\u003c\/li\u003e\n\t\u003cli\u003eFoam gasket + balancing elements (EPDM)\u003c\/li\u003e\n\t\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eAlways‑ready infrastructure:\u003c\/strong\u003e Bench‑anchored vacuum workholding that stays installed, keeps the surface clear, and keeps setups repeatable.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eClean toolpaths by default:\u003c\/strong\u003e Built for routing, sanding, machining, and assembly where top‑mounted clamps and pods get in the way.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eVacuum + registration, by design:\u003c\/strong\u003e Vacuum resists lift; when shear matters, add mechanical stops and indexing.\u003c\/li\u003e\n\t\u003cli\u003e\n\u003cstrong\u003eTwo configurations, one ecosystem:\u003c\/strong\u003e Both configurations scale into the broader SYS‑GRP system over time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAdd bench-edge control.\u003c\/strong\u003e The AnchorPod Edition already routes vacuum below the surface — \u003ca href=\"https:\/\/forg3d.store\/products\/sys-grp-hub-control-your-workholding\"\u003eSYS-GRP Hub\u003c\/a\u003e brings valve switching and quick-release to the rail edge so you can engage, isolate, and purge without stepping back to the source.\u003c\/p\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003eCompatible with \u003cstrong\u003e20 mm (MFT‑style)\u003c\/strong\u003e hole‑grid benches.\u003c\/li\u003e\n\t\u003cli\u003eVacuum resists lift; when lateral load (shear) matters, use registration \/ mechanical stops.\u003c\/li\u003e\n\t\u003cli\u003eVacuum performance depends on sealing quality and surface flatness.\u003c\/li\u003e\n\t\u003cli\u003eFor setup guidance and detailed usage, see the AnchorPod Guide \u0026amp; FAQ.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cul\u003e\n\t\u003cli\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS‑GRP Workholding System\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLearn more about the platform:\u003c\/p\u003e\n\u003cul\u003e\n\t\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/vacuum-workholding-the-foundation-of-modern-precision\"\u003eVacuum Workholding: The Foundation of Modern Precision\u003c\/a\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/anchorpod-vs-verso-max-bundles-which-vacuum-workholding-system-to-choose\"\u003eAnchorPod vs Verso Max Bundles: Which Vacuum Workholding System to Choose\u003c\/a\u003e\u003c\/li\u003e\n\t\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/anchorpod-the-forg3d-launch-edition-a-new-era-of-workholding\"\u003eAnchorPod + The FORG3D Launch Edition: A New Era of Workholding\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhat's the difference between Maximus and Magnus?\u003c\/strong\u003e\u003cbr\u003eBoth configurations run the same bench-anchored AnchorPod infrastructure. Maximus ships with two AnchorPods and two Edition pods — built for frequent horizontal bench work where you're moving between setups and want fast, repeatable hold across the grid. Magnus ships with one AnchorPod and one larger-format Magnus pod, paired with BenchPups for precise indexing — the play here is repeat operations where the pod stays in place and workpieces come on and off quickly. If your work is varied and fast-moving, Maximus is the default. If you're running the same operation across multiple pieces and want indexed, no-fuss cycling, Magnus is built for it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Edition include everything I need to get started?\u003c\/strong\u003e\u003cbr\u003eAlmost — you'll need a vacuum source. Every other component is included: AnchorPods, Edition pods, Argos, AnchorDogs, gaskets, spacers, tubing, fittings, and the FORG3D Edition Systainer³ S 76 with precision fitout. Compatible vacuum sources include budget continuous-duty pumps, VacuPress, and Grabo \/ DeWalt Grabo with the SYS-GRP adapter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I expand beyond the Edition later?\u003c\/strong\u003e\u003cbr\u003eYes. Both configurations are built on standard SYS-GRP infrastructure — additional AnchorPods, Edition pods, and Hub valve routing all integrate directly. The Systainer³ S 76 fitout is sized for the Edition contents; if you expand significantly, a second fitout or larger Systainer may be worth considering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-GRP AnchorPod — Magnus FORG3D Edition","offer_id":51944876441914,"sku":"GRP.APD.MAGSET.Q01.A.5003","price":275.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP AnchorPod — Maximus FORG3D Edition","offer_id":51944876409146,"sku":"GRP.APD.MAXSET.Q01.A.5003","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/anchorPod_plug-284_2.jpg?v=1759285545"},{"product_id":"sys-grp-bench-grip-set-verso-max","title":"SYS-GRP BenchGrip — FORG3D Edition","description":"\u003cp\u003eMost vacuum workholding starts as a parts list. BenchGrip Sets arrive as a system — three configurations curated for bench-to-rail, Dash-Board PWS, and heavy-panel workflows, each packed in a FORG3D Edition Systainer³ S 76 with PodDock fitout.\u003c\/p\u003e\n\u003cp\u003eThe curation is the point. Each set ships with a pod mix matched to a specific workholding priority, rail inserts and AnchorDogs already included, tubing and fittings staged in the fitout — so setup starts at the bench, not at the parts bin.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003eThree configurations, each built around a different workholding priority. Pick Verso for bench-plus-rail flexibility; pick Verso Dash if your setup runs Dash-Board PWS or dual-channel extrusion; pick Max when you're holding larger panels and holding force is the priority.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Verso Configuration\u003c\/strong\u003e\u003cbr\u003eVerso is built for the shop where the next job could be anything — a wide panel on the bench or a rail-guided cut along an extrusion. The pod mix covers both: Maximus for broad hold-down, Minimus Singles for targeted placement, and the Dual for middle-ground coverage. If you need one kit that follows the work rather than dictating it, Verso is the default.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(3) Minimus Single Pods\u003c\/li\u003e\n\u003cli\u003e(1) Minimus Dual Pod\u003c\/li\u003e\n\u003cli\u003e(1) Maximus Pod\u003c\/li\u003e\n\u003cli\u003e(6) AnchorDogs — 20 mm\u003c\/li\u003e\n\u003cli\u003e(6) M6 Rail Inserts\u003c\/li\u003e\n\u003cli\u003e(1) SYS-FIT PodDock fitout\u003c\/li\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76\u003c\/li\u003e\n\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Verso Dash Configuration\u003c\/strong\u003e\u003cbr\u003eVerso Dash is for the maker running a Dash-Board PWS or dual-channel extrusion system who needs pods to mount below the surface, not just beside it. Offset Pods are what make this work — standard Minimus pods can't reach the workpiece geometry where Offset pods slot naturally. If you're already on that infrastructure, this is the configuration built for it.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Minimus Offset Pods\u003c\/li\u003e\n\u003cli\u003e(1) Minimus Single Pod\u003c\/li\u003e\n\u003cli\u003e(1) Minimus Dual Pod\u003c\/li\u003e\n\u003cli\u003e(1) Maximus Pod\u003c\/li\u003e\n\u003cli\u003e(6) AnchorDogs — 20 mm\u003c\/li\u003e\n\u003cli\u003e(6) M6 Rail Inserts\u003c\/li\u003e\n\u003cli\u003e(1) SYS-FIT PodDock fitout\u003c\/li\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76\u003c\/li\u003e\n\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFORG3D Edition — Max Configuration\u003c\/strong\u003e\u003cbr\u003eMax is optimized for larger panels and heavier operations where contact area is the priority. Two Maximus pods anchor broad hold-down; two Minimus Duals fill coverage across the workpiece. The trade-off is specialization — Max is a bench configuration, not a rail-versatility kit. If most of your work is \"put the panel down and hold it,\" Max is the right call.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Maximus Pods\u003c\/li\u003e\n\u003cli\u003e(2) Minimus Dual Pods\u003c\/li\u003e\n\u003cli\u003e(6) AnchorDogs — 20 mm\u003c\/li\u003e\n\u003cli\u003e(6) M6 Rail Inserts\u003c\/li\u003e\n\u003cli\u003e(1) SYS-FIT PodDock fitout\u003c\/li\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76\u003c\/li\u003e\n\u003cli\u003ePU tubing with required fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurated pod mix:\u003c\/strong\u003e Each configuration ships with a pre-selected combination matched to its workholding priority — no guesswork on what to order.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReady-to-deploy storage:\u003c\/strong\u003e Every set includes a FORG3D Edition Systainer³ S 76 with PodDock fitout — pods organized, fittings staged, ready to roll out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRail and bench compatible:\u003c\/strong\u003e M6 rail inserts and AnchorDogs included in every set for both extrusion-mounted and dog-hole workholding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem-first design:\u003c\/strong\u003e All pod formats integrate with SYS-GRP Hub manifolds, Nexus Baseplate surfaces, and BenchGrip Brackets for vertical orientation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"notion-callout\"\u003e\n\u003cp\u003e\u003cstrong\u003eAdd bench-edge control.\u003c\/strong\u003e BenchGrip Sets route vacuum to the pods — \u003ca href=\"https:\/\/forg3d.store\/products\/sys-grp-hub-control-your-workholding\"\u003eSYS-GRP Hub\u003c\/a\u003e adds valve switching and quick-release at the rail edge so you can engage, isolate, and purge without stepping back to the source.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum pump not included — compatible with budget vacuum pumps, VacuPress Compact 150 and larger, and Grabo \/ DeWalt Grabo (with SYS-GRP adapter)\u003c\/li\u003e\n\u003cli\u003ePod mix varies by set configuration; see Build Your System above for exact contents of each set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eShips with a \u003ca href=\"https:\/\/forg3d.store\/products\/forg3d-edition-s-76-systainer\"\u003eSystainer³ S 76\u003c\/a\u003e with PodDock fitout — available directly from FORG3D.\u003c\/li\u003e\n\u003cli\u003ePart of the \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS-GRP Workholding System\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eLearn more:\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/anchorpod-vs-verso-max-bundles-which-vacuum-workholding-system-to-choose\"\u003eAnchorPod vs Verso Max Bundles: Which Vacuum Workholding System to Choose\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/vacuum-workholding-the-foundation-of-modern-precision\"\u003eVacuum Workholding: The Foundation of Modern Precision\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eWhich set is right for me — Verso, Verso Dash, or Max?\u003c\/strong\u003e\u003cbr\u003eStart with your infrastructure. If your bench runs Dash-Board PWS or dual-channel extrusion, Verso Dash is the only configuration with Offset Pods — that's not interchangeable with the other sets. Between Verso and Max, the question is versatility vs. hold-down force: Verso covers bench and rail; Max is optimized for larger panels where contact area matters more than flexibility.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need a vacuum pump?\u003c\/strong\u003e\u003cbr\u003eYes — no pump is included with any BenchGrip Set. The sets are compatible with budget continuous-duty pumps, VacuPress Compact 150 and larger, and Grabo \/ DeWalt Grabo with the SYS-GRP adapter. If you're unsure which pump to pair with your setup, see the \u003ca href=\"https:\/\/forg3d.store\/blogs\/news\/choosing-the-right-vacuum-source-for-sys-grp-workholding\"\u003eVacuum Source Guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat are Minimus Offset Pods and why are they only in Verso Dash?\u003c\/strong\u003e\u003cbr\u003eOffset Pods are designed for Dash-Board PWS and dual-channel extrusion setups with 3\/4 in thick work surfaces — they sit flush with the surface rather than proud of it, so they can stay installed without interfering with routing, sanding, or other surface operations. That always-in-place behavior is the point: no pulling pods before a pass, no breaking down the setup to do the next operation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add more pods or expand the set later?\u003c\/strong\u003e\u003cbr\u003eYes. All pod formats — Minimus Single, Dual, Offset, and Maximus — are available individually and are interchangeable within the SYS-GRP system. The PodDock fitout in the Systainer³ S 76 accommodates additional pods as your system grows.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the Systainer³ S 76 fit on a standard Systainer stack?\u003c\/strong\u003e\u003cbr\u003eYes. The FORG3D Edition Systainer³ S 76 is T-LOC compatible and stacks with Systainer³ M-series and other T-LOC format Systainers. The PodDock fitout is precision-sized for the S 76 interior — pods, tubing, and fittings stay organized in transit and on the bench.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Workflow. Without Limits.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"SYS-GRP BenchGrip — Verso FORG3D Edition","offer_id":51944638415162,"sku":"GRP.BGP.VERSO.Q01.A.9005","price":275.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip — Verso Dash FORG3D Edition","offer_id":52161179615546,"sku":"GRP.BGP.VDASH.Q01.A.9005","price":275.0,"currency_code":"USD","in_stock":true},{"title":"SYS-GRP BenchGrip — Max FORG3D Edition","offer_id":51944638447930,"sku":"GRP.BGP.MAXSET.Q01.A.9005","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/nexusDockLaunch_sept2025-158.jpg?v=1759283468"},{"product_id":"sys-srf-surface-simplified","title":"SYS‑SRF - Surface, Simplified","description":"\u003cp\u003eSYS‑SRF is a portable, purpose-built work surface that locks in to the top of your Systainer stack. It turns your mobile kit into a usable stage for layout, staging, and light assembly — removing the dead zone between arriving on site and being ready to build. Each surface seats directly onto the stack and, depending on the configuration, opens up extrusion interfaces, doghole grids, and dedicated tool docking.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003eSYS‑SRF is available in two sizes — \u003cstrong\u003eMinor\u003c\/strong\u003e and \u003cstrong\u003eMetris\u003c\/strong\u003e — each offered in three configurations: \u003cstrong\u003eCore\u003c\/strong\u003e, \u003cstrong\u003eFoundation\u003c\/strong\u003e, and \u003cstrong\u003eDock for your TrackSaw\u003c\/strong\u003e. Pick your size first (how much working area you want), then the configuration (how much system geometry you want built into the top).\n\u003cstrong\u003eMinor\u003c\/strong\u003e\nThe worksurface is designed to work on either Systainer family while staying within the SYS‑CART rolling envelope. On a Systainer M Series, the footprint overhangs the stack top — creating room for extrusion interfaces along the outer edges and BenchGrip vertical workholding that normally requires a full bench. On a Systainer L Series, Minor sits clean and surface‑first, with full BenchGrip horizontal workholding compatibility.\nMinor is available in \u003cstrong\u003eCore\u003c\/strong\u003e, \u003cstrong\u003eFoundation\u003c\/strong\u003e, and \u003cstrong\u003eDock for your TrackSaw\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore:\u003c\/strong\u003e Extrusion interfaces on the outside edges plus 8 dogholes — system‑capable for repeatable setups and accessory mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoundation:\u003c\/strong\u003e Full 20 mm grid (96 mm pitch, MFT‑compatible) with extrusion interfaces on the outside edges — when repeatability and positioning are the priority.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock for your TrackSaw:\u003c\/strong\u003e A pocketed nest so the track saw has a real home on the stack, not just a parking spot.\n\u003cstrong\u003eMetris\u003c\/strong\u003e\nMore working area, more system leverage. Metris overhangs the L‑Series Systainer top — opening up extrusion interfaces, BenchGrip in both horizontal and vertical orientations, and roughly 20% more working area than Minor. For M‑Series users, the Metris footprint opens an additional path: AnchorPod vacuum workholding on the same stack you were already moving.\nMetris is available in \u003cstrong\u003eCore\u003c\/strong\u003e, \u003cstrong\u003eFoundation\u003c\/strong\u003e, and \u003cstrong\u003eDock for your TrackSaw\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCore:\u003c\/strong\u003e Extrusion interfaces on the outside edges plus 8 dogholes — system‑capable for repeatable setups and accessory mounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFoundation:\u003c\/strong\u003e Full 20 mm grid (96 mm pitch, MFT‑compatible) with extrusion interfaces on the outside edges — for workflows that benefit from a full field of positioning options.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDock for your TrackSaw:\u003c\/strong\u003e A pocketed rail rest and saw body nest scaled to the Metris footprint.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn‑stack ready:\u003c\/strong\u003e Locks in to the top of a Systainer stack so your setup stays coherent from shop to jobsite.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStable working plane:\u003c\/strong\u003e A consistent surface for staging, layout, and light assembly when the nearest “flat spot” is never actually flat.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast deployment:\u003c\/strong\u003e Drops in quickly and packs down clean so it behaves like a real part of the kit, not a special event.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem‑expandable:\u003c\/strong\u003e Core, Foundation, and Dock configurations include extrusion interfaces with mounting hardware for standard-sourced extrusion — opening the path to SYS‑PLT plates and SYS‑FIT racks below the working surface; along with SYS-GRP integration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSYS‑SRF is a work surface product only — no built‑in vacuum, no integrated clamping.\u003c\/li\u003e\n\u003cli\u003eCore, Foundation, and Dock configurations include extrusion interfaces on the outer edges. Mounting hardware is included; extrusion is sourced separately. SYS‑PLT plates attach to the extrusion, allowing SYS‑FIT racks to mount above the working surface.\u003c\/li\u003e\n\u003cli\u003eBenchGrip pods are compatible with SYS‑SRF in surface‑friendly orientations.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Systainer3 M 89 and L 89 Organizers\u003c\/li\u003e\n\u003cli\u003eOlder T-Loc Systainers require our optional T-Loc Surface Cleats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forg3d.store\/collections\/sys-fit\"\u003eSYS‑FIT\u003c\/a\u003e — fitout racks that mount above the surface via SYS‑PLT for tool deployment and organization\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forg3d.store\/collections\/sys-plt\"\u003eSYS‑PLT\u003c\/a\u003e — plates that connect SYS‑FIT racks to sourced extrusion via the interfaces on Core, Foundation, and Dock configurations\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forg3d.store\/collections\/sys-mnt\"\u003eSYS‑MNT\u003c\/a\u003e — mounting solutions for Systainer stack integration\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS‑GRP\u003c\/a\u003e — vacuum workholding; BenchGrip pods are compatible with SYS‑SRF in surface‑friendly orientations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003e**What is SYS‑SRF for?**SYS‑SRF is built for staging, layout, and light assembly on a stable surface that travels with your stack. It reduces re‑setup friction when you move between bench, cart, and jobsite contexts.\n**Does SYS‑SRF include vacuum workholding?**No. SYS‑SRF is a surface product only. Vacuum workholding lives in \u003ca href=\"https:\/\/forg3d.store\/collections\/sys-grp\"\u003eSYS‑GRP\u003c\/a\u003e.\n**Is SYS‑SRF a replacement for a full workbench?**No. It expands your usable work surface on the top of your kit; it does not replace a dedicated bench.\n**What is SYS‑SRF made from?**SYS‑SRF panels are CNC-cut from a high-density, moisture-resistant engineered wood composite — built for stiffness, flatness, and long service life in workshop and jobsite conditions.\n**What extrusion does SYS-SRF use, and is it included?**SYS-SRF works with standard off-the-shelf 30-series (30 mm) extrusion — 250 mm to 300 mm sections recommended. Mounting hardware is included; 30-series extrusion is available separately from FORG3D.\u003c\/p\u003e\n","brand":"FORG3D","offers":[{"title":"SYS-SRF Surface - Minor - Core","offer_id":53246590714170,"sku":"SRF.MIN.CORE.Q01.A.7021","price":85.0,"currency_code":"USD","in_stock":true},{"title":"SYS-SRF Surface - Metris - Core","offer_id":53246590746938,"sku":"SRF.MET.CORE.Q01.A.7021","price":105.0,"currency_code":"USD","in_stock":true},{"title":"SYS-SRF Surface - Minor - Foundation","offer_id":53246590779706,"sku":"SRF.MIN.FNDN.Q01.A.7021","price":85.0,"currency_code":"USD","in_stock":true},{"title":"SYS-SRF Surface - Metris - Foundation","offer_id":53246590812474,"sku":"SRF.MET.FNDN.Q01.A.7021","price":105.0,"currency_code":"USD","in_stock":true},{"title":"SYS-SRF Surface - Minor - Dock (TrackSaw)","offer_id":53246590845242,"sku":"SRF.MIN.DKTS.Q01.A.7021","price":85.0,"currency_code":"USD","in_stock":true},{"title":"SYS-SRF Surface - Metris - Dock (TrackSaw)","offer_id":53246590878010,"sku":"SRF.MET.DKTS.Q01.A.7021","price":105.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/sysSRF_launch-467_ecc6594a-2fe9-4c2b-9603-17fdd525bd74.jpg?v=1774940772"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/collections\/systainer.jpg?v=1785080198","url":"https:\/\/forg3d.store\/collections\/built-for-systainer.oembed","provider":"FORG3D Store","version":"1.0","type":"link"}