{"product_id":"sys-grp-fs-rail-forg3d-edition","title":"SYS-GRP FS Rail Manus — FORG3D Edition","description":"\u003cp\u003eHold a guide rail with vacuum and it becomes workholding — place it, seal it, cut clean, with no clamps in the path. Maximus is the full-size pod, the broad-contact grip built for the bench. SYS-GRP FS Rail Manus — FORG3D Edition takes that grip on the road. The Manus pod brings Maximus-class hold into a body sized for a Systainer³ S 76, packed with the Janus driver and every part to run it.\u003c\/p\u003e\n\u003ch2\u003eBuild Your System\u003c\/h2\u003e\n\u003cp\u003eFORG3D Edition for FS Rails ships in one configuration: Manus. It's the same clamp-free rail holding as the individual FS Rail pods, curated to travel complete in a Systainer³ S 76.\u003c\/p\u003e\n\u003cp\u003eFORG3D Edition — Manus Configuration\u003c\/p\u003e\n\u003cp\u003eManus is the FS Rail pod built for the Edition case — engineered to match the Maximus pod's holding force in a footprint that fits an S 76. The kit runs two pods, and the whole setup deploys clamp-free straight out of the case.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) SYS-GRP FS Rail Manus Pods\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(2) SYS-GRP FS Rail Brackets + M4 hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(4) M5 Rail Inserts + M5 hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(1) SYS-GRP Janus — double-ended bench driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eLinking 1\/4 in PU tubing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e(1) FORG3D Edition Systainer³ S 76 with precision fitout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClamp-free rail deployment: Two Manus pods, brackets, and M5 rail inserts hold a Festool-style guide rail with vacuum — no hardware in the cut path, straight into the cut.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe Janus bench driver, in the box: The new FORG3D double-ended bench driver sets the bracket and rail-insert hardware and travels in the fitout, not a drawer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eComplete, nothing to source: Pods, hardware, driver, storage, and precision fitout arrive as one kit. Vacuum source not included.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eScales into SYS-GRP: Built on standard SYS-GRP infrastructure — additional pods, Hub valve routing, and Nexus surfaces integrate directly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompatibility \/ Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFestool-style guide rails in all standard widths, alongside standard rail accessories: parallel guides, rail squares, and the Festool LR32 system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eThe two-pod configuration is sized for standard rail lengths. For long rails over 1700 mm, plan for additional holding force and check the FS Rail Vacuum Pod Guide for tested configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFor vertical applications, run pre-operation testing to confirm sufficient holding force, since materials vary widely.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eVacuum pump not included. For a fully mobile setup, pair with the SYS-GRP Nexus Baseplate and a Grabo Pro-Lifter, Grabo Brushless, or DeWalt Grabo source.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFor long single-operator rails, the Accessory Valve Kit lets you engage the center pod first, then lock the outer pods.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSystem Links\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSYS-GRP FS Rail Vacuum Pods — the individual Maximus and Hydraeus pods, sold as bundles rather than a complete Edition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eSYS-GRP Workholding System — the full system this Edition plugs into; compatible with SYS-GRP vacuum pod formats, Hub manifolds, and Nexus Baseplate surfaces unless otherwise noted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eFS Rail Vacuum Pod Guide \u0026amp; FAQ — rail compatibility and tested configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cp\u003eHow is the Manus pod different from the Maximus FS Rail pod?\u003c\/p\u003e\n\u003cp\u003eIt's engineered to hold as hard in a smaller body. Maximus reaches its grip at bench size, too large to store in a Systainer³ S 76; the Manus pod keeps that holding force in a footprint that fits the case. If you already run Maximus pods on the bench, Manus is the version that travels.\u003c\/p\u003e\n\u003cp\u003eDoes the Edition include everything I need to get started?\u003c\/p\u003e\n\u003cp\u003eAlmost — you'll need a vacuum source. Every other component is in the box: the Manus pods, FS Rail brackets, M5 rail inserts, hardware, linking tubing, the Janus bench driver, and the FORG3D Edition Systainer³ S 76 with precision fitout. For a mobile setup, pair the kit with the SYS-GRP Nexus Baseplate and a Grabo Pro-Lifter, Grabo Brushless, or DeWalt Grabo source.\u003c\/p\u003e\n\u003cp\u003eWhat is the Janus driver?\u003c\/p\u003e\n\u003cp\u003eJanus is FORG3D's new double-ended bench driver. It sets the bracket and rail-insert hardware in the kit and travels in the fitout, so the tool that deploys the pods is always with them.\u003c\/p\u003e\n\u003cp\u003eCan I use this on long guide rails?\u003c\/p\u003e\n\u003cp\u003eThe two-pod configuration is sized for standard rail lengths. Long rails over 1700 mm need extra holding force. Check the FS Rail Vacuum Pod Guide for tested long-rail configurations, and consider the Accessory Valve Kit for single-operator long-rail work.\u003c\/p\u003e\n\u003cp\u003eWhy is this sold only as a FORG3D Edition and not a bare kit?\u003c\/p\u003e\n\u003cp\u003eA FORG3D Edition is a complete setup where every part in the box comes from FORG3D: the pods, the companion hardware, the driver, the storage, and a precision fitout. The Manus pod was built for that turnkey box rather than as a standalone pod, so the Edition is how it ships.\u003c\/p\u003e\n\u003cp\u003eYour Workflow. Without Limits.\u003c\/p\u003e","brand":"FORG3D","offers":[{"title":"Default Title","offer_id":53835237589306,"sku":"GRP.FSP.MANFGE.Q01.A.5003","price":225.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0846\/0930\/2842\/files\/DSC00884_eb58cbb1-f3ed-4b24-9205-e8317f7ca5bf.jpg?v=1786154931","url":"https:\/\/forg3d.store\/products\/sys-grp-fs-rail-forg3d-edition","provider":"FORG3D Store","version":"1.0","type":"link"}