SYS-DST- Festool CSC SYS 50 / Kapex Instructions

SYS-DST- Festool CSC SYS 50 / Kapex Extractor Adapter should fit inside the dust port on the Festool CSC SYS 50 Table Saw,  Kapex KS 120, Kapex KSC 60 and Festool Cleaning Sets. If the adapter does not fit in the dust port opening on your tool please do not force the adapter into the port as you may damage your dust port. Please contact us and let us know that you are having an issue with the adapter.

Using the Adapter:

  1. Line up the channels on the adapter with the small rectangle lugs on the inside of the dust port

 

  1. Insert the adapter into the dust port until it stops and then turn clockwise (to the right) approximately a 1/4 turn.  This will lock the adapter into the dust port using some light friction. Please do not force the adapter.  If it does not lock in dust port, please contact us.

 

  1. Attach your Festool 36mm dust extractor hose to the end of the adapter.