-
Vacuum Exhaust4" Exhaust Adaptor for Black Box Vacuum Solutions
Routes waste heat from Black Box Storm and Cyclone pumps to a standard 4" exhaust hose. High-temperature nylon, complete install kit.
From $62.50 USDIN STOCK -
SYS-DST · DUST COLLECTIONSYS-DST Festool CSC SYS 50 / Kapex Extractor Adapter
Locks a 36 mm extractor hose into the CSC SYS 50 dust port using the tool's own lugs, so it holds through the cut.
$29 USDIN STOCK -
Dust CollectionSYS-DST Festool to 2.5" Adapter
Connects Festool 27 mm and 36 mm bayonet outlets to standard 2.5 in dust collector hose in one step.
$29 USDIN STOCK -
Hose ManagementSYS-DST Magnetic Hose Dock
A magnetic dock that parks any extractor hose end on ferrous surfaces. Mounts by zip tie or the Festool Bluetooth remote strap.
$26 USDIN STOCK -
Clamping Element RackSYS-FIT Festool Clamping Elements (FCE) Rack
Bench-side dock for two Festool Clamping Elements MFT-SP. Mounts to any SYS-PLT surface or directly to the bench.
$20 USDIN STOCK -
Grabo Lifter FitoutSYS-FIT Grabo Fitout for Systainer3 M 237
Dual Grabo / Grabo Pro carry in a Systainer³ M 237. High-temp thermoplastic structure, magnetic anchors and TPU saddles, two spare batteries. Fitout only — Systainer sold separately.
From $82 USDIN STOCK -
Hose & Cord RackSYS-FIT Hose & Cord Hanger (HCH) Rack
Routes extractor hoses, power cords, and dust lines off the floor and out of foot traffic. Mounts to any SYS-PLT surface or directly to the wall.
$30 USDIN STOCK -
Clamp RackSYS-FIT MFT & Rail Clamp (MRC) Rack
Three MFT-style or guide rail clamps racked bench-side. Fits Festool, Parf, and most standard profiles. SYS-PLT or direct mount.
$22 USDIN STOCK -
Rack Expansion PodsSYS-FIT Modular Pods (ModPod) Accessory Mounts
Eight tool-specific mounts for SMR and SAR rack ends — pencils, chucks, countersinks, calipers, bench dogs, router bits, hose dock, and a SYS-ORG bin. Two per end.
From $12 USDIN STOCK -
Workholding FitoutSYS-FIT Nexus Dock Fitout for Systainer3 Sortainer/2 M337
Sortainer/2 M 337 fitout that docks a Nexus baseplate with the Grabo or DeWalt Grabo still attached — battery, bracket, and pod bins staged in the drawers.
From $48 USDIN STOCK -
Workholding FitoutSYS-FIT Pod Dock — Compact Storage for Pods, AnchorDogs, and Rail Inserts
Systainer³ S 76 fitout for SYS-GRP gear — up to six Minimus or three Maximus pods, plus dedicated bays for AnchorDogs and FS Rail Inserts.
$32 USDIN STOCK -
Flat-Tool RackSYS-FIT Rail Square & Square-ish Stuff Hanger (RSH) Rack
Wall storage for rail squares, Shaper Plate, and Shaper Trace. Minimus for one tool, Maximus for the stacked pair. Mounts to SYS-PLT or directly to the wall.
From $16 USDIN STOCK -
Sander at the ReadySYS-FIT Random Orbital Sander (ROS) Rack
Keep your sander at the ready. Three sizes — 90mm, 125mm, 150mm — color-matched to Festool, Bosch, and Mirka.
From $28 USDIN STOCK -
Origin Accessory RackSYS-FIT Shaper Accessory Rail (SAR) Rack
Every critical Shaper Origin accessory racked bench-side — Minimus for the core kit, Maximus adds SM1 Spindle storage. ModPod expansion on both ends.
From $38 USDIN STOCK -
Bench-Side RackSYS-FIT Side Mount Rail (SMR) Rack
Bench-edge storage for four dogs, four clamps, a pocket rule, and a magnetic tray — ModPod expansion on both ends. Mounts to extrusion, MFT, or Dash-Board PWS.
From $16 USDIN STOCK -
Guide Rail RackSYS-FIT Track Saw Guide Rail (TRK) Rack
Under-bench stowage for track saw guide rails — sold as a pair, customizable badges, tested with Festool, Makita, DeWalt, and more. SYS-PLT or direct mount.
$42 USDIN STOCK -
Grid Drawer InsertsSYS-GRD Grid Pattern Drawer Inserts
Extends the SYS-ORG bin grid to any drawer, container, or case, in 50 mm increments from 50 mm to 250 mm.
From $7 USDIN STOCK -
SYS-GRD Drawer InsertsSYS-GRD SYS-Sort & SYS-Combi Drawer Insert
Brings SYS-ORG and Systainer³ Organizer bin compatibility to T-LOC SYS-Sort and SYS-Combi drawers.
From $12 USDIN STOCK -
Top-Side Bench DogSYS-GRP AnchorDogs
Top-side-fastening bench dogs for SYS-GRP. Compatible with 20mm and 3/4 in dog holes. Secure pods, brackets, and jigs from above — no reaching under the bench.
From $9 USDIN STOCK -
Dog Hole PlugsSYS-GRP AnchorPlugs
Magnetic stainless plugs for 20mm MFT-style dog holes. Drop in, keep debris out, remove from topside with the Argos driver. Six pack sizes — 20 to 200. Argos driver included with 100 and 200 packs.
From $36 USDPRE-ORDER -
Modular System PodsSYS-GRP AnchorPod Edition Pods
Modular pods for the AnchorPod system. Dual-sided integrated gasket — instant vacuum hold, no separate parts. Maximus for elevated clearance; Magnus for precision registration. AnchorPod required.
From $38 USDIN STOCK -
Ready-to-Run SystemSYS-GRP AnchorPod — FORG3D Edition
Complete bench-anchored vacuum workholding system. Maximus or Magnus configuration — includes AnchorPods, Edition pods, Argos, AnchorDogs, gaskets, tubing, and Systainer³ S 76 fitout.
$285 USDPRE-ORDER -
Bench-Integrated WorkholdingSYS-GRP AnchorPod — Precision-Engineered Workholding Solution
Patent-pending bench-integrated vacuum anchor for 20 mm (MFT) and 3/4 in hole grids. Three modes: mechanical anchoring, gasket vacuum hold, and AnchorPod-Edition pod integration.
From $38 USDPRE-ORDER -
3-in-1 Bench ToolSYS-GRP Argos — Your Loyal Bench Driver
One CNC-machined tool, three jobs — driver, magnetic pickup, and 20 mm registration dog. Ships with a 4 mm hex bit.
$32 USDPRE-ORDER
The Foundry
Your Bench
The account side of FORG3D. Track orders, see what completes the system you actually own, and reach support in one place — pairings keyed to your bench, not the catalog.
Your Bench
