NoneSYS-FIT Mounting

SYS-PLT Pro Mounting System

$12.00 USD Taxes & shipping calculated at checkout

Every shop's workflow varies. SYS-PLT is the backbone that adapts a SYS-FIT rack to any surface — Systainer³ front, MFT, Dash-Board PWS, or extrusion. Now machined from aluminum and universal: one Minimus per single-rail surface, one Maximus per dual-rail, SYS3 for any Systainer³ front. Pick the plate your workflow calls for; the rack never changes.

Variant
Surface
Systainer³ / MFT / Dash-Board PWS / 15-series extrusion
Modes
Mounting
Manufactured
Machined
Integrates
SYS-FIT racks · Systainer³ · MFT · Dash-Board PWS · 15-series extrusion
Material
Machined aluminum
Weight
57 g
Ships in 4–7 business days Engineered in Atlanta · Built for You

SYS-PLT is the surface layer of the SYS-FIT system — the plates that put a rack wherever you work. The line is now machined aluminum, and the geometry consolidated: a single Minimus fits every single-rail surface (MFT, Dash-Board PWS, 15-series), a single Maximus fits every dual-rail, and the SYS3 plate slides into the front card slot across the Systainer³ line. Racks and plates stay separate, so you buy only the one your workflow calls for.

Build Your System

Two questions decide it: what surface, and how much hold. Match the plate to your bench, and step up to Maximus where the load earns it.

SYS-PLT Minimus Pro

Single-rail machined-aluminum plate, universal across MFT, Dash-Board PWS, and 15-series extrusion. The quick, sturdy default for most racks. Includes M4 mounting hardware.

SYS-PLT SYS3 Pro

Slides into the front card slot across the Systainer³ line — M, L, Sortainer, and XXL — turning a case front into a mounting surface. For mobile, Systainer-native setups. Includes M4 mounting hardware.

SYS-PLT Maximus Pro

Dual-rail machined-aluminum plate, universal across MFT, Dash-Board PWS, and 15-series, for the heaviest racks and the highest hold. Ships as a two-plate set to span the full profile. Includes M4 mounting hardware.

Key Features
  • Machined aluminum: The plates are now cut from aluminum — stiffer and more precise under load than the printed mounts they replace.
  • Universal by rail: One Minimus fits every single-rail surface (MFT, Dash-Board PWS, 15-series); one Maximus fits every dual-rail. Fewer parts, same coverage.
  • A plate for every surface: Systainer³ front and single- or dual-rail extrusion. French Cleat mount available separately.
  • The backbone, not a bundle: Racks and mounts sell separately, so you buy only the mount your surface needs — or add it when you configure a rack.
  • Direct-mount fallback: Every SYS-FIT rack has built-in fastener points, so you can mount straight to a surface without a SYS-PLT plate.
Compatibility & Notes
  • Match the plate to your surface: Systainer³ front (SYS3 Pro), single-rail MFT / Dash-Board PWS / 15-series (Minimus Pro), or dual-rail (Maximus Pro).
  • Maximus Pro ships as a two-plate set to span the full dual-rail profile.
  • No SYS-PLT purchase required for direct-to-surface mounting using the fastener points on SYS-FIT racks.
  • All SYS-PLT Pro plates are machined aluminum. The French Cleat mount is a separate, additively manufactured product.
System Links
  • SYS-FIT Racks — compatible racks
  • SYS-FIT Fitouts — mounting options

Your Workflow. Without Limits.

Reviews

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
S
Steven A Beckman
Sander mount

A simple product that both adds efficiency and takes better care of your equipment. Wish I had bought it years ago

B
Bill Mellon
Great conveniences for the MFT

Purchased a 5” and a 6” sander holder and cord/hose holder. These are well made and well thought out. Easy to put on and take off the MFT. When sanding with my Festool 5 or 6 inch sander it’s not always easy to keep on the table depending upon the size of the work piece. The holdrers make it very convenient. Same with the cord and dust collector hoses. I use my MFT table for many tasks so the ease of using the SYS mounting system is great for adding or removing the holders. Highly recommend!!

William, Thanks for the review and patronage! We are glad you are putting your SYS-FIT Racks to good use keeping those horizontal work surfaces clear and ready to use!

Your Workflow. Without Limits.

Engineered in Atlanta · Built for You

MORE FROM THE SYSTEM

Build it further.