The grip,madeto travel.
Manus brings Maximus-class vacuum hold to your guide rail in a pod sized for a Systainer³ S 76. Place the rail, seal it, and cut clean, with no clamps in the path. Two pods, the Janus driver, and every part to run them ship in the case.
Your Workflow. Without Limits.
Build the system.
Ten families, one design language. Start with one — everything fits everything else.
-
Ready-to-Run SystemSYS-GRP AnchorPod — FORG3D Edition
Complete bench-anchored vacuum workholding system. Maximus or Magnus configuration — includes AnchorPods, Edition pods, Argos, AnchorDogs, gaskets, tubing, and Systainer³ S 76 fitout.
$285 USDIN STOCK -
Curated Workholding SetSYS-GRP BenchGrip — FORG3D Edition
Three curated BenchGrip configurations for bench, rail, and heavy-panel workholding — each matched to a workflow priority and ready for work in the shop or on the go.
$285 USDIN STOCK -
Bench-Integrated WorkholdingSYS-GRP AnchorPod — Precision-Engineered Workholding Solution
Patent-pending bench-integrated vacuum anchor for 20 mm (MFT) and 3/4 in hole grids. Three modes: mechanical anchoring, gasket vacuum hold, and AnchorPod-Edition pod integration.
From $38 USDIN STOCK -
Portable Workholding BaseSYS-GRP Nexus Baseplate
Vacuum workholding baseplate for Grabo Pro-Lifter 20 or DeWalt Grabo 20V. Drop the Grabo in, connect SYS-GRP pods, hold in seconds. 6mm aluminum composite construction. Two variants — Grabo not included.
$86 USDIN STOCK -
Ready-to-Run Rail KitSYS-GRP FS Rail Manus — FORG3D Edition
Complete clamp-free rail-holding system in a Systainer³ S 76. Manus configuration — two Manus pods engineered to hold like Maximus in a smaller body, the Janus bench driver, brackets, rail inserts, tubing, and precision fitout. Vacuum source not included.
$225 USDPRE-ORDER -
Narrow-Stock Workholding SetSYS-GRP BenchGrip Akros — FORG3D Edition
The narrow-stock BenchGrip set — four Harpyie pods for face frames, rails, and stock down to 45 mm, staged in a Systainer³ S 76 and ready to deploy.
$285 USDIN STOCK
-
Ready-to-Run System
SYS-GRP AnchorPod — FORG3D Edition
Complete bench-anchored vacuum workholding system. Maximus or Magnus configuration — includes AnchorPods, Edition pods, Argos, AnchorDogs, gaskets, tubing, and Systainer³ S 76 fitout.
$285 USDIN STOCK -
Curated Workholding Set
SYS-GRP BenchGrip — FORG3D Edition
Three curated BenchGrip configurations for bench, rail, and heavy-panel workholding — each matched to a workflow priority and ready for work in the shop or on the go.
$285 USDIN STOCK -
Bench-Integrated Workholding
SYS-GRP AnchorPod — Precision-Engineered Workholding Solution
Patent-pending bench-integrated vacuum anchor for 20 mm (MFT) and 3/4 in hole grids. Three modes: mechanical anchoring, gasket vacuum hold, and AnchorPod-Edition pod integration.
From $38 USDIN STOCK -
Modular Vacuum PodsSYS-GRP BenchGrip Minimus Vacuum Pods
Compact 90 mm vacuum pods for bench, extrusion, and custom fixture workholding. Single Port, Dual Port (chainable), and Offset Mount for adapting to other extrusion channel geometries — like Dash-Board PWS.
From $29 USDIN STOCK -
Large-Format Vacuum PodSYS-GRP BenchGrip Maximus Vacuum Pods
Expanded-coverage vacuum pods for MFT-style 96 mm benches. 90 mm × 185 mm footprint, roughly 3× the capacity of Minimus. Available as standard, Offset Mount, or Maximus + Minimus Dual Bundle.
From $38 USDIN STOCK -
Narrow Stock WorkholdingSYS-GRP BenchGrip Harpyie Vacuum Pods
Vacuum workholding for narrow stock down to 45 mm on MFT-style 96 mm dog hole benches. Harpyie Minimus (215 mm span) and Maximus (312 mm span) — no adapters required.
From $28 USDIN STOCK
-
Systainer³ Organizer Insert BinSYS-ORG Bin — 50 mm (Half Height)
50 mm half-height insert bins for Systainer³ M 89 and L 89 organizers — shallow, double-stacking storage for variety-heavy setups. Eight standard Tanos colors; moves to SYS-GRD drawers and Sortainers.
From $16 USDIN STOCK -
Systainer³ Organizer Insert BinSYS-ORG Bin — 50 mm (Full Height)
50 mm full-height insert bins for Systainer³ M 89 and L 89 organizers — deep, single-category storage in eight standard Tanos colors. Moves to SYS-GRD drawers and Sortainers without re-sorting.
From $24 USDIN STOCK -
Systainer³ Division BinsSYS-ORG Multi-Division Bins for Systainer3 Organizer
Multi-Division Bins for Systainer³ M89 and L89 organizers. Four size options from 75×125mm (2-division) to 100×175mm (7-division). Sold in pairs. Pair with a matching half-height bin to keep division contents contained in transit.
From $18 USDIN STOCK -
Systainer³ Organizer Insert BinSYS-ORG Bin — 25 mm (Full Height)
25 mm full-height insert bins for Systainer³ M 89 and L 89 organizers — the narrowest bin, for deep runs of small, high-count smalls. Eight standard Tanos colors; moves to SYS-GRD drawers and Sortainers.
From $20 USDIN STOCK -
Systainer³ Organizer Insert BinSYS-ORG Bin — 100 mm (Full Height)
100 mm full-height insert bins for Systainer³ M 89 and L 89 organizers — the widest footprint, full depth for bulk and tall items. Eight standard Tanos colors; moves to SYS-GRD drawers and Sortainers.
From $28 USDIN STOCK -
Systainer³ Organizer Insert BinSYS-ORG Bin — 100 mm (Half Height)
100 mm half-height insert bins for Systainer³ M 89 and L 89 organizers — the widest footprint, shallow for wide-but-not-deep categories. Eight standard Tanos colors; moves to SYS-GRD drawers and Sortainers.
From $20 USDIN STOCK
-
Stack Work SurfaceSYS-SRF Surface — Work Surface, Simplified
A work surface that locks onto your Systainer stack — Minor or Metris, in Core, Foundation, or TrackSaw Dock.
From $85 USDIN STOCK -
Surface ExpansionSYS-SRF Extrusion Kit
Two 250 mm anodized rails expand the system. SYS-GRP, SYS-FIT, SYS-PLT on the side — off the top.
$28 USDIN STOCK
Born in the shop. Built for yours.
Every FORG3D design begins with firsthand experience — tested and refined in the same kind of shop it's made for. No guessing at what works. Built, broken, and built better until it earns its place.
Because "Your workflow, without limits" isn't a tagline — it's the process. And that process carries through every product, every system, and every detail that bears the FORG3D name.
Built as a system. Not a parts catalog.
Ten families. One design language. Everything fits everything else.
-
Modular by design
SYS-ORG, SYS-FIT, and SYS-SRF are designed from day one to work together. Start with one. Layer in the rest as the work demands. The system scales with your shop.
-
Systainer native
Every dimension starts from the Systainer interior. No adapters. No compromises. No rattle at speed.
-
Over-engineered on purpose
Extra millimeter clearances for wood movement. Radiused stress points. Flow geometry for vacuum performance. We use what we make — so it has to be right.
BUILT FOR
FORG3D doesn't build a system for you to adapt to. We build a system that adapts to your tools, your shop, your jobsite, your workflow. Built for you.
-
BUILT FORSYSTAINER
Drops into the Systainer ecosystem you already own.
Explore -
BUILT FORFESTOOL
Native to the MFT 20 mm grid and the Festool workflow.
Explore -
BUILT FORDASH-BOARD PWS
Anchors directly into the Dash-board PWS surface.
Explore -
BUILT FOREVERYONE
3/4 in hole, vacuum anchor — fits the bench you already have.
Explore -
BUILT FORHOME WORKSHOPS
Built for the weekend bench that wants to act like a real shop.
Explore -
BUILT FORPASSIONATE MAKERS
For makers who'd rather not fight the workpiece every cut.
Explore -
BUILT FORTHE OBSESSIVES
When repeatable is the whole point.
Explore -
BUILT FORFINISH CARPENTERS
Site-ready holding for the trim, the panels, the install.
Explore -
BUILT FORFURNITURE MAKERS
Hold the curve, the joint, the assembly — surface stays clear.
Explore -
BUILT FORMOBILE WORKSHOPS
Stays installed. No setup tax on the next site.
Explore -
BUILT FORPROFESSIONAL CONTRACTORS
Repeatable holding across crews, sites, and seasons.
Explore
