SYS-DST Magnetic Dock

The SYS-DST Magnetic Hose Dock is designed to work with the Festool 27mm and 36mm extractor hose and specifically with the Bluetooth remote strap provided with the remote.  The instructions here outline this configuration, but the dock could be adapted for use with any extractor hose with the use of zip ties, velcro straps or tape.  We are working to source a quality velcro strap to open up mounting options and will notify any users if we have a solution in the future.  To begin installation you will need the following:

  1. SYS-DST Magnetic Hose Dock
  2. Festool Bluetooth Remote Strap (or alternative mounting strap)
  3. Festool Extractor Hose (or alternative extractor hose)
  4. Hook or pick set (optional)
  5. Needle nose pliers (optional)
  6. Cup of coffee or other adult beverage

INSTRUCTIONS

  1. To start, simply thread the remote strap thru the SYS-DST Magnetic Hose Dock.  you may need to employ a tool to aid in this process as the fitment is designed to be tight
  2. Once you have successfully threaded the strap thru the assembly, position the strap in the desired location on your extractor hose
  3. Hook the strap to one side of the Bluetooth remote
  4. Hook the strap to the other side of the Bluetooth remote
  5. Take a drink and use your new magnetic superpowers responsibly

NOTES

  • If you are using the SYS-FIT Magnetic ModPod in concert with our SYS-DST MagDock and are finding alignment difficult, rotate the magnet in the ModPod assembly to help align the magnetic poles.  The magnet in the MagDock has been assembled with Loctite to prevent the connection from backing out, so adjustments need to be made on the ModPod side.